solutions for structural steel fabricators solutions for structural steel fabricators solutions for structural steel fabricators
Products

Amada Band Saw CTB400

amada band saw

Amada Band Saw

The Model CTB400 band Saw Machine is developed for high production, accuracy, and economic cutting.

This state of the art machine is specifically designed to use the multifaceted Amada carbide band saw blade.

The combination of these two has achieved an excess of 95cm/min cutting rates, surface finishes in the range of 62 RMS while holding accuracy's well within the + - 0.05/mm of diameter.

The world's first CNC OPTIMAL CUTTING CONTROL (patent pending) presets feeds and speeds according to material specification.

This unit has 229 factory installed material specs, with 100 available for custom materials. Feeds and speeds are automatically set to achieve the most economical cutting with the highest productivity possible, while maintain noise levels below 85 decibels.

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the Amada Band Saw CTB400.

> Back to Amada Band Saws

 

Features of the Amada Band Saw CTB400:

 

  • Anti Vibration Guide Roller
  • Automatic Blade Guide Setting
  • Automatic Wire Brush Setting
  • Blade Deviation Monitor
  • Chip Conveyor
  • Front and Rear Vise (Full Stroke)
  • Inverter Driven Variable Blade Speed
  • Material Separation at End of Cut
  • Motion Detector
  • Plasma Display
  • Re-Circulating Coolant System
  • Safety Interlocks
  • Self-Diagnostic CNC

Specifications of the Amada Band Saw CTB400:

Cutting Capacity - Round (diameter) 1.18" - 16" (30 - 430 mm)
Cutting Capcity - Rectangle (W x H) 1.18" x 0.5" - 16" x 16" (30 x 13 - 430 x 430 mm)
Blade Dimensions 15'6" x 0.055" x 1-1/2" (4725 x 1.4 x 41 mm)
Blade Speed 50 - 492 ft./mn Inverter (15 - 150 m/mn Inverter)
Tension Control Hydraulic
Blade Saw Motor 10 HP (7.5 kW)
Hydraulic Pump Motor 2 HP (1.5 kW)
Cutting Fluid Pump Motor 1/4 HP (0.18 kW)
Wire Brush Motor 1/8 HP (0.09 kW)
Power Supply Voltage AC220?10%, 3 PH, 60 Hz (All Other Voltages Require a Transformer)
Power Requirement 16.6 kVA
Cutting Fluid Tank Capcity 60.8 gal (230 Liters)
Cutting Fluid Pump Type Electric
Hydraulic Tank Capcity 9.2 gal (35 Liters)
Chip Disposal Chip Conveyor
Material Index Mechanism Shuttle Vise
Stroke Front: 11.8" (300 mm) Rear: 15.7" (400 mm)
Number of Cut-Off Pieces 1-999
Machine Dimensions 89" x 88.9" x 90.7" (2260 x 2257 x 2304 mm)
Table Height (Above Floor) 39.4" (1,000 mm)
Machine Weight 9,261 lbs (4,200 kg)

Media


Please call for more information about Amada Band Saw CTB400 1 (800) 286-3624

Options for the Amada Band Saw CTB400:

 

Options for Amada Band Saws:

AXCELA G SERIES Band Saw Blades

High-performance Carbide Tipped Band Saw Blades
High-quality carbide tips and the dove tail tooth shape. AXCELA makes incredible cutting speed for hard to cut material.

BCTBR Band Saw Blade

Multi Faceted Carbide Tipped Blade

Designed exclusively for heat-resistant alloys, nickel-based alloys, titanium alloys, and special cast tensile steels, all with high tensile strength of over 142,000 psi. It features ultra-hard, diamond sharp carbide tipped teeth that resist low thermal conductivity and abrasion that can quickly break down conventional bi-metal type bands.

MAGNUM HI-LO Band Saw Blade

Patented Varying Tooth Height and Set M-71 Bi-metal Blade
High-quality carbide tips and the dove tail tooth shape. AXCELA makes incredible cutting speed for hard to cut material.

Hi-Lo Band Saw Blade

Varying Tooth Height Design, M-42 Welded Edge

The Hi-Lo blade features a high and low teeth height design and a 15-degree rake angle. The blade is ideal for cutting hard steels.

CHIP BREAKER Band Saw Blade

Patented Gullet Design
Designed to reduced heat generated at increased chip load. With reduced tooth stripping and breaking this equates to the lowest possible cost per square inch of metal cutting.

SGLB Band Saw Blade

M-42 Bi-metal Blade

The SGLB was designed to cover a broad range of cutting applications and to provide maximum efficiency in sawing wear-resistant tool steels. The blade's tough M-42 cobalt edge resists heat and abrasion, while the varied pitch tooth form expands the ranges of sizes and shapes that can be sawed successfully without changing blades.

COBALT8 Band Saw Blade

Amada Modified M42 High-Speed Steel Bi-Metal Blade
General-purpose blade ideal for cutting mild steel and structural steel. "Chip Curler" tooth shape and unique set pattern result in longer blade life.

SMARTCUT BAND Band Saw Blade

Thinner Blade of SGLB and Magnum Hi-Lo

Thinner more than 10% from regular SGLB or Magnum Hi-Lo. Specialized Blade for PCSAW330

PROTECTOR EX M42 Band Saw Blade

Exclusive use for structural steel with M-42 Edge. Which has both strength against tooth chipping and high wear resistance. PROTECTOR EX added to the back face of the tooth tip prevents excessive cutting.

PROTECTOR Band Saw Blade

Exclusive Use for Structual Steel with M-30 Matrix Bi-metal Blade

Exclusive use for structural steel. Protector provides long blade life and prevents tooth breakage, eliminating excessive tooth stripping. It can withstand the shock of interrupted cuts, allowing for heavier penetration for faster cutting rates. Protector uses a broaching style set pattern designed to eliminate pinching, which prevents the blade from binding the cut.

MGLB Band Saw Blade


General Purpose Matrix Bi-metal Blade

The MGLB is best suited for cutting structural shapes, tubing and stacks of mild steel pieces. The MGLB allows band saw machines to cut a wide range of material sizes and shapes without requiring a change of blades. Its tough high-speed steel teeth resist chipping, stripping and abrasion. It can also tolerate the occasional improper speeds and feeds that are often used by inexperienced saw operators.