solutions for structural steel fabricators solutions for structural steel fabricators solutions for structural steel fabricators
Products

BAILEIGH PROGRAMMABLE TUBE BENDER RDB-325

Baileigh Programmable Pipe Bender RDB-325

Baileigh Programmable Tube Bender RDB-325

The RDB-325 pipe bender has a massive capacity of 2" Schedule 80 pipe (Mild Steel T.S. 64,000 PSI) and 3" round tubing with a 16" maximum center lines depending on material OD. Tooling for the RDB-325 is the same high quality tooling that entire line of Baileigh Industrial top loading tube benders use and with over 5000 die sets available, there will be one for your application.

This pipe bender comes standard with a simple to use touch-screen controller that holds up to 170 programs with up to ten bends per program. If more memory is needed, a memory card (standard 2CB SD card, max) can be used to store programs as well.

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on Baileigh Industrial Tube and Pipe Benders.

> Back to Baileigh RDB Tube and Pipe Benders

 

Features of Baileigh PROGRAMMABLE TUBE BENDER RDB-325:

 

  • Computer programmable
  • Programmer holds 170 jobs with 10-bends per job
  • Touch-screen
  • Can bend 360 degrees left or right (with optional tooling)
  • Six bending speeds
  • FAST... 10-seconds to 180 degrees
  • 16.5" (419mm) maximum centerline radius
  • Accepts optional positioning table
  • Portable

Specifications of the Baileigh PROGRAMMABLE TUBE BENDER RDB-325

Mild Steel Pipe (Schedule 40) 2.00" -- 60mm x 5.5mm
Aluminum Pipe (Schedule 40) 2.50" -- 73mm x 5.5mm
Stainless Steel Pipe (Schedule 40) 2.00" -- 60mm x 4mm
Mild Steel Round Tube (Wall) 3.00" (.095) -- 76mm x 2.5mm
Aluminum Round Tube (Wall) 3.00" (.203) -- 76mm x 5mm
Stainless Steel Round Tube (Wall) 3.00" (.095) -- 76mm x 2.5mm
Chromolly Round Tube (Wall) 3.00" (.083) -- 76mm x 2mm
Mild Steel Rod 1.25" (32mm)
Mild Steel Square Tube (Wall) 2.00" (.125) -- 50mm x 3mm
Minimum OD .25" -- 6mm
Maximum Speed to 180 Degrees 10 Sec.
Maximum Center Line Radius (CLR)* 16.50" (419mm)
Minimum CLR .50" (13mm)
Power Requirements 220V (1Ph)-- 400V, 3Ph, 50Hz
Weight (lbs.) 1200 (545 kg.)
Length 60.00" (1524mm)
Width 32.00" (813mm)
Height 48.00" (1220mm)

Media


Video of the Baileigh Programmable Tube Bender RDB-325:

 

OPTIONS FOR Baileigh PROGRAMMABLE TUBE BENDER RDB-325

 

Options for Baileigh Industrial Tube Benders:

Baileigh Rotary Positioning Table

Baileigh Rotary Positioning Table - IDX-10

What is the perfect complement to any computer controlled Baileigh Tube and Pipe Bender?  A Rotary Positioning Table, of course.


A Baileigh Industrial tube bender fitted with a rotary positioning table allows for accurate bends in varying planes, as well as consistent measurements between bends. Available for the RDB-250, 325, and 350-TS, the tables are available in lengths of 5, 10, 15, and 20', there is a table perfect for any size shop.  Only have some jobs that would require the rotary indexing table, it can be attached or taken off of the bender with ease.


The table comes with an 8" three jaw chuck with 2-1/2" thru hole that allows for longer pieces of tubing than the table length. Chuck can handle up to 4-1/2" OD. The minimum OD is 1/4".  The table has a linear indicator strip so the operator can set up accurate distances between bends. Mechanical stops can be positioned for the start of each bend. Using the mechanical stops is very beneficial for repeatability on bigger production runs.  Another nice feature of the table is that the positioning carriage rolls on a precision V block rail and rides the rail using V-block bearings.  These bearings are placed on eccentric shafts, which allows for tolerance adjustment allowing the most accurate results.

 

 

Please call for more information on Baileigh Programmable Tube Bender RDB-325 1 (800) 286-3624