Unique design makes this bandsaw a real problem
solver and an exceptional value.
These Johnson mitering horizontal bandsaw will miter up to 60° to the right, and anywhere in between. They also feature head down feed, multimode cutting, quick set cam-activated vises, direct drive, and a heavy cast head frame.
Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the Dake Johnson mitering horizontal BandSaw.
Head down feed is gravity fed and controlled by way of an infinitely variable flow control valve. The flow control allows for presetting the down feed rate and retaining this setting at the end of the cut to minimize dead air cutting.
Multimode features allow three different cutting modes: 1. Manual mode 2. Manual mode with hydraulic down feed regulation 3. Automatic down feed
Heavy cast head frame for rigidity and roller and carbide guides for optimum cutting quality. Easily set the most appropriate blade and head descend speed according to the stock material, size and shape for maximum efficiency.
Quick set cam-activated vises. Adjustable vise with handwheel for initial set up and quick release cam lever for repeat cutting. Vise on the Trad 300 model is gib adjustable.
Drive system. Direct drive means full power to the drive wheel without horse power loss through belts and pulleys. Low maintenance without belts and pulleys.
Miter up to 60? to the right, and anywhere in between. They head, NOT the material, rotates for angle cutting. (Trad 300 will miter up to 45? left.)
|Model||Zip 28||Zip 30||Zip 30||TRAD301|
|Voltage||110 volt - 1 phase||220 volt - 3 phase||420 volt - 3 phase||220 volt - 3 phase|
|Max. Blade Size (inches)||97-5/8x1||97-5/8x1||97-5/8x1||108-1/4x1|
|Max. Vise Opening||10||10||10||12|
|Blade Speed (fpm)||295||105/210||105/210||108/216|
|Solid Round 90? Capacity||8-5/8||8-5/8||8-5/8||10|
|Solid Round 45? Right Capacity (in)||5-1/2||5-1/2||5-1/2||7-1/2|
|Solid Round 60? Right Capacity (in)||3-1/2||3-1/4||3-1/4||4-1/4|
|Solid Square 90? Capacity||7-1/2||7-7/8||7-7/8||9-3/4|
|Solid Square 45? Right Capacity||5-1/2||5-1/2||5-1/2||7|
|Solid Square 60? Right Capacity||3-1/4||3-1/4||3-1/4||4-1/3|
|Solid Rectangle 90? Capacity||9-5/8x3||9-5/8x4-5/8||9-5/8x4-5/8||11-3/4x7|
|Solid Rectangle 45? Right Capacity||5-1/2x5-1/2||5-1/2x5-1/2||5-1/2x5-1/2||7-1/2x6-5/8|
|Solid Rectangle 60? Right Capacity||3-1/4x3-1/4||3-1/4x3-1/4||3-1/4x3-1/4||4-1/4x5-7/8|
|A Work Table Height (in)||37||38||38||37|
|B Height (inches)||70-3/4||72-3/4||72-3/4||76-3/4|
|C Floor Space Left to Right||39-3/8||47-1/4||47-1/4||47-1/4|
|D Floor Space Front to Back||68-7/8||72-3/4||72-3/4||78-3/4|
|Voltage||420 volt - 3 phase|
|Max. Blade Size (inches)||108-1/4x1|
|Max. Vise Opening||12|
|Blade Speed (fpm)||108/216|
|Solid Round 90? Capacity||10|
|Solid Round 45? Right Capacity (in)||7-1/2|
|Solid Round 60? Right Capacity (in)||4-1/4|
|Solid Square 90? Capacity||9-3/4|
|Solid Square 45? Right Capacity||7|
|Solid Square 60? Right Capacity||4-1/3|
|Solid Rectangle 90? Capacity||11-3/4x7|
|Solid Rectangle 45? Right Capacity||7-1/2x6-5/8|
|Solid Rectangle 60? Right Capacity||4-1/4x5-7/8|
|A Work Table Height (in)||37|
|B Height (inches)||76-3/4|
|C Floor Space Left to Right||47-1/4|
|D Floor Space Front to Back||78-3/4|