Micrometer adjustable, rear operated backgauge with 24” travel complete with (2) independent micrometer adjustable stops. East stop slides along support arms and has hand-wheel micro-adjustment for precision settings.

Front Operated, PLC Controlled POwer CNC Gauge:

Extremely heavy duty, front operated Standard Industrial CNC backgauge with 30” travel and multi-level X axis programmable control. 90 programmable jobs with 10 backstop depths per job for a total of 900 depths. This control comes with job stacking and Go-To ability as well as manager controlled password protection to keep operators from changing programs. Also includes 5 year battery backup, + or – keys for minute depth changes and a 4 level LCD display for high visibility (2 Yr. Warranty on PLC).

standard cnc backgauge standard cnc backgauge standard cnc backgauge All of our gauges can be retro-fitted to practically any press brake

Vertical and horizontal finger adjustment

Incredibly rigid gauging system, the strongest backgauge available on the market

1, 2 or 3 Axis (X, Y, and R) CNC controls – U.S. Made Automec CNC controls – Waltham, MA

Automec CNC300	Automec CNC2000	Automec G24HD 3 Axis Backgauge

300 job programmability Automatic calibration to tool heights RS232 download port 16 digit alpha-numeric part numbers Angle adjust for angle correction 11 digit job number	10,000 job storage/32 bends per job Floppy disk drive w/extra 1,000 jobs per disk Full color 9.5” graphics screen Angle or ram depth programming with direct conversion Pop Up “Windows” w/8 bends on one screen

Both Autometc Standard CNC Backgauges are equipped with the following:

Single entry Ram offset & Bend allowance
Inch/Millimeter conversion
Backgauge reversal on pinch point
1, 2 and 3 axis capability
Up to 48” travel (24” is standard)
Incredibly Quick and Simple job set-up
Tooling Library
Parts Counter
Help screens
Teach Mode
Off-line programming
2 Year Parts Warranty

Automec CNC2000 CNC backgauge System With 2D Graphics

This system allows the customer to draw the work piece either on the control shop floor or in their office PC. The CNC2000 2D graphics system features a full tool library with up to 50 bends that can be simulated to check for die interference before the part is formed. Programs can also be created in a simple numeric mode when the 2D graphics are not required. Tools can be downloaded into the system from the tool manufacturers files or they can drawn directly in the CNC2000 2D graphics system.

The CNC2000 2D graphics system includes an impressive 10” color TFT VGA display with a simple, easy to understand keyboard. This system can be purchased as a 2 axis (X & Y), also with a 3rd axis (R) and is additionally available with a 4th axis allowing the operator to utilize a CNC controlled bed crowning system (example: Wila T9 or E4 crowning systems).

Standard Features:
--10,000 job storage capacity
--3.5” floppy drive allowing storage of up to 1.44MB or 1,500 additional jobs
--10” color graphics display
--Scratch proof, shop floor durable keyboard
--2 dimensional off-line parts programming software
--(1) RS232 serial port and (1) parallel port
--24 VDC 110VA maximum power
--System configuration—CPV Intel 486 or Pentium, FPGA integrated logic, fiber optic,
solid state display.
--Keyboard port to utilize additional 6 pin keyboard (for alpha-numeric input)
--Metallic enclosures for all electronics

The offline programming software included with this system allows the engineer/operator to download the 2D graphics directly to the control on the brake. A local area network (LAN) can be added at an additional cost (contact for details). Also, an optional 3 dimensional office graphics package is available.

Model LC Series Standard CNC Backgauge System

Model LC Series Standard CNC Backgauge System

	The model LC series is an extremely advanced and yet incredibly simple gauging system designed for virtually any Standard Industrial press brake customer. This system is specifically designed for our customers who want a dependable heavy duty control and gauge that will give them precision while not wasting time with confusing programming procedures. Very straight forward easy to understand prompts with an always accessible help screen quickly guide the operator through the 1 through 8 axis of control. The LC series has a superior warranty of 3 years and incredibly fast travel speeds of up to 1,180 i.p.m. It can also control X, Y, R, X1 and X2 and Z1 and Z2 axes at extremely competitive pricing.

3 Year Parts Warranty		240/120VAC power supply
The LC series control can control the X, Y, X1 and X2, R, Z1 and Z2 axis.		Relay and function outputs for interfacing to machines
Can accept up to 250 programs with a total of 2,500 steps with automatic advance.		Diagnostics and error statistics
25” of X axis travel		Standard tooling selection, 50 tool library
6” of R axis travel		Programming resolution—.0004”
6’ of Z axis travel available for single drive		Accuracy +,- .002”
12’ of Z axis travel available for dual drive		Repeatability +,- .001”
(3) operating modes—Programming, Manual and Automatic		Maximum travel speed 1,180 Inches Per Minute
Question (?) prompt available at all times to instruct operator on operation		Manual positioning +/- .004”
Parts counter		RS232 serial line connection for data transmission
Programmable retract distance and time delay		1” dia. Ball screws--Ballscrew bushings (4) for single drive—(8) for dual drive
Automatic angle and bend allowance calculation		(2) micro-adjustable flip fingers (additional fingers available as option)
Servo motor drives		Single dive gauge bar length—39”-78” --Dual drive gauge bar length—78”-157”

Address 6720 NW 15th Way, Fort Lauderdale FL 33309 USA : Toll Free (800) 286 3624 : Tel (954) 956 3131 : Fax (954) 956 3199

AVENGER Beam Drill : CLIPPER Angle Line : LIBERATOR Beam Coper : TERMINATOR Band Saw : ELIMINATOR Material Handling