the past 35 years Standard Industrial has overwhelmed their customers and
competition by the uncompromising rigidity of Standard Press
Brakes. This rigidity coupled with simplicity and trouble free
operation has made Standard one of the top selling press
brake manufacturers in the world.
Newly developed press brake ram and
hydraulic systems have separated Standard Industrial even
more from the other brake manufacturers.Too
many manufacturers today base their machine's productivity
on computerized technology rather than the quality of the
brake itself. Standard Industrial starts with a
solid well-designed 100% U.S. made machine and then add the
merits of CNC capability to provide you with the best
machine on the market today. Standard Industrial is one of the top
suppliers of the U.S. made Automec backgauges.
offers a base machine up to 6 axis CNC control including
X, Y, R, X1 & X2 and Z1 & Z2. Add to this tooling and
accessories from such fine manufacturers like R-K Brake Dies
and Wila and their is no doubt that you will have the best brake
the U.S. has to offer.
- Best built, heaviest brake on the
market Least amount of deflection on any brake available All parts covered for 5 years and afterwards a lifetime
supply of available parts from local vendors
- All press brakes available from base models up to 6 axis CNC
control including X, Y, R, X1 & X2 and Z1 & Z2.
AB100-10 Standard Press Brakes Shown)
full tonnage throughout the stroke and more importantly
throughout the entire length of the bed and ram the Standard
Industrial brake has a repeatability advantage over most
dual cylinder brakes. Direct dual cylinder brakes require
complicated hydraulic and electrical systems to balance
their tonnage and they require a vast amount of labor and
parts as the machines age. Typically the customer is forced
to pay exorbitant prices for the parts and labor that they
can only get from the manufacturer. We at Standard pride
ourselves on the fact that customers can get parts for their
brake from local suppliers and the simplicity of the
equipment requires only the most basic trouble shooting.
Owned, Operated and Manufactured in The U.S.A.
hydraulic/mechanical system used by Standard is certainly a
superior concept as evident by the number of manufacturers
currently offering similar products. However, we have more
experience in years and thousands of products designed and
manufactured than any in the business.
experience is reflected in our size and type of bearings and
shafts as well as our technical capability to design a bellcrank system that does not have excessive side loads.
All forces are vertical above the ram centerline and are
contained in the "box" structure that houses the drive
system and ram guides.
|The ram of the press brake is guided by heavy duty
slides as used in straight side presses. These slides are
located both front and back of each end of the ram and are
clearly superior to the small rear mounted guides found on
other press brakes.
brakes require guides to contain end movement of the ram.
Other manufacturers use tiny segmented guides incorporated
in the main ram guides. The Standard design is to provide a
heavy duty, self aligning system at the rear center of the
ram and located inside the press frame. This system
requires no operator action when the ram level is adjusted.
For more information on
Standard Press Brakes call
Ocean Machinery now at 1 (800) 286-3624