The Amada Band Saw VM2500 model is a Vertical Band Saw for precise cutting of blocks and plates in all material grades.
Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the Amada Band Saw VM2500.
|Cutting Capacity (L x H)||98.4" x 20" (2500 x 500 mm)|
|Throat Depth||20" (500 mm)|
|Work Load Capacity||11,023 lbs (5,000 kg)|
|Blade Dimensions||15'4" x 0.050" x 1-1/2" (4670 x 1.3 x 41 mm)|
|Blade Speed||60-295 ft./min, 60Hz Stepless (17-90 m/min, 60Hz Stepless)|
|Blade Cutting Control||Hydraulic Pressure - Flow Control Valve|
|Blade Saw Motor||8 HP (5.5 kW)|
|Hydraulic Pump Motor||2 HP (1.5 kW)|
|Cutting Fluid Pump Motor||1/2 HP (0.25 kW)|
|Power Supply Voltage||AC220±10%, 3 PH, 60 Hz (Or AC440V, 3PH, 60Hz)|
|Power Requirement||10.7 kVA|
|Cutting Fluid Tank Capcity||31.7 gal (120 Liters)|
|Cutting Fluid Pump Type||Electric|
|Hydraulic Tank Capcity||10 gal (38 Liters)|
|Chip Disposal||Chip Conveyor|
|Feed Mechanism||Table Feed, Hydraulic|
|Feed Stroke||100.4" (2,550 mm)|
|Machine Dimensions||73.6" x 230" x 106" (1870 x 5845 x 2700 mm)|
|Table Height (Above Floor)||39.46" (1000 mm)|
|Machine Weight||15,432 lbs (7,000 kg)|
Please call for more information about Amada band Saw Model VM2500 1 (800) 286-3624
AXCELA G SERIES Band Saw Blades
High-performance Carbide Tipped Band Saw Blades
BCTBR Band Saw Blade
Multi Faceted Carbide Tipped Blade
Designed exclusively for heat-resistant alloys, nickel-based alloys, titanium alloys, and special cast tensile steels, all with high tensile strength of over 142,000 psi. It features ultra-hard, diamond sharp carbide tipped teeth that resist low thermal conductivity and abrasion that can quickly break down conventional bi-metal type bands.
MAGNUM HI-LO Band Saw Blade
Patented Varying Tooth Height and Set M-71 Bi-metal Blade
Hi-Lo Band Saw Blade
Varying Tooth Height Design, M-42 Welded Edge
The Hi-Lo blade features a high and low teeth height design and a 15-degree rake angle. The blade is ideal for cutting hard steels.
CHIP BREAKER Band Saw Blade
Patented Gullet Design
SGLB Band Saw Blade
M-42 Bi-metal Blade
The SGLB was designed to cover a broad range of cutting applications and to provide maximum efficiency in sawing wear-resistant tool steels. The blade's tough M-42 cobalt edge resists heat and abrasion, while the varied pitch tooth form expands the ranges of sizes and shapes that can be sawed successfully without changing blades.
COBALT8 Band Saw Blade
Amada Modified M42 High-Speed Steel Bi-Metal Blade
SMARTCUT BAND Band Saw Blade
Thinner Blade of SGLB and Magnum Hi-Lo
Thinner more than 10% from regular SGLB or Magnum Hi-Lo. Specialized Blade for PCSAW330
PROTECTOR EX M42 Band Saw Blade
Exclusive use for structural steel with M-42 Edge. Which has both strength against tooth chipping and high wear resistance. PROTECTOR EX added to the back face of the tooth tip prevents excessive cutting.
PROTECTOR Band Saw Blade
Exclusive Use for Structual Steel with M-30 Matrix Bi-metal Blade
Exclusive use for structural steel. Protector provides long blade life and prevents tooth breakage, eliminating excessive tooth stripping. It can withstand the shock of interrupted cuts, allowing for heavier penetration for faster cutting rates. Protector uses a broaching style set pattern designed to eliminate pinching, which prevents the blade from binding the cut.
MGLB Band Saw Blade
The MGLB is best suited for cutting structural shapes, tubing and stacks of mild steel pieces. The MGLB allows band saw machines to cut a wide range of material sizes and shapes without requiring a change of blades. Its tough high-speed steel teeth resist chipping, stripping and abrasion. It can also tolerate the occasional improper speeds and feeds that are often used by inexperienced saw operators.