The Model CTB400 band Saw Machine is developed for high production, accuracy, and economic cutting.
This state of the art machine is specifically designed to use the multifaceted Amada carbide band saw blade.
The combination of these two has achieved an excess of 95cm/min cutting rates, surface finishes in the range of 62 RMS while holding accuracy’s well within the + – 0.05/mm of diameter.
The world’s first CNC OPTIMAL CUTTING CONTROL (patent pending) presets feeds and speeds according to material specification.
This unit has 229 factory installed material specs, with 100 available for custom materials. Feeds and speeds are automatically set to achieve the most economical cutting with the highest productivity possible, while maintain noise levels below 85 decibels.
Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the Amada Band Saw CTB400.
Cutting Capacity – Round (diameter) | 1.18″ – 16″ (30 – 430 mm) |
Cutting Capcity – Rectangle (W x H) | 1.18″ x 0.5″ – 16″ x 16″ (30 x 13 – 430 x 430 mm) |
Blade Dimensions | 15’6″ x 0.055″ x 1-1/2″ (4725 x 1.4 x 41 mm) |
Blade Speed | 50 – 492 ft./mn Inverter (15 – 150 m/mn Inverter) |
Tension Control | Hydraulic |
Blade Saw Motor | 10 HP (7.5 kW) |
Hydraulic Pump Motor | 2 HP (1.5 kW) |
Cutting Fluid Pump Motor | 1/4 HP (0.18 kW) |
Wire Brush Motor | 1/8 HP (0.09 kW) |
Power Supply Voltage | AC220?10%, 3 PH, 60 Hz (All Other Voltages Require a Transformer) |
Power Requirement | 16.6 kVA |
Cutting Fluid Tank Capcity | 60.8 gal (230 Liters) |
Cutting Fluid Pump Type | Electric |
Hydraulic Tank Capcity | 9.2 gal (35 Liters) |
Chip Disposal | Chip Conveyor |
Material Index Mechanism | Shuttle Vise |
Stroke | Front: 11.8″ (300 mm) Rear: 15.7″ (400 mm) |
Number of Cut-Off Pieces | 1-999 |
Machine Dimensions | 89″ x 88.9″ x 90.7″ (2260 x 2257 x 2304 mm) |
Table Height (Above Floor) | 39.4″ (1,000 mm) |
Machine Weight | 9,261 lbs (4,200 kg) |
Please call for more information about Amada Band Saw CTB400 1 (800) 286-3624
Options for Amada Band Saws:
AXCELA G SERIES Band Saw BladesHigh-performance Carbide Tipped Band Saw Blades |
|
BCTBR Band Saw BladeMulti Faceted Carbide Tipped Blade Designed exclusively for heat-resistant alloys, nickel-based alloys, titanium alloys, and special cast tensile steels, all with high tensile strength of over 142,000 psi. It features ultra-hard, diamond sharp carbide tipped teeth that resist low thermal conductivity and abrasion that can quickly break down conventional bi-metal type bands. |
|
MAGNUM HI-LO Band Saw BladePatented Varying Tooth Height and Set M-71 Bi-metal Blade |
|
Hi-Lo Band Saw BladeVarying Tooth Height Design, M-42 Welded Edge The Hi-Lo blade features a high and low teeth height design and a 15-degree rake angle. The blade is ideal for cutting hard steels. |
|
CHIP BREAKER Band Saw BladePatented Gullet Design |
|
SGLB Band Saw BladeM-42 Bi-metal Blade The SGLB was designed to cover a broad range of cutting applications and to provide maximum efficiency in sawing wear-resistant tool steels. The blade’s tough M-42 cobalt edge resists heat and abrasion, while the varied pitch tooth form expands the ranges of sizes and shapes that can be sawed successfully without changing blades. |
|
COBALT8 Band Saw BladeAmada Modified M42 High-Speed Steel Bi-Metal Blade |
|
SMARTCUT BAND Band Saw BladeThinner Blade of SGLB and Magnum Hi-Lo Thinner more than 10% from regular SGLB or Magnum Hi-Lo. Specialized Blade for PCSAW330 |
|
PROTECTOR EX M42 Band Saw BladeExclusive use for structural steel with M-42 Edge. Which has both strength against tooth chipping and high wear resistance. PROTECTOR EX added to the back face of the tooth tip prevents excessive cutting. |
|
PROTECTOR Band Saw BladeExclusive Use for Structual Steel with M-30 Matrix Bi-metal Blade Exclusive use for structural steel. Protector provides long blade life and prevents tooth breakage, eliminating excessive tooth stripping. It can withstand the shock of interrupted cuts, allowing for heavier penetration for faster cutting rates. Protector uses a broaching style set pattern designed to eliminate pinching, which prevents the blade from binding the cut. |
|
MGLB Band Saw BladeGeneral Purpose Matrix Bi-metal Blade The MGLB is best suited for cutting structural shapes, tubing and stacks of mild steel pieces. The MGLB allows band saw machines to cut a wide range of material sizes and shapes without requiring a change of blades. Its tough high-speed steel teeth resist chipping, stripping and abrasion. It can also tolerate the occasional improper speeds and feeds that are often used by inexperienced saw operators. |