Geka Hydracrop 55 Ironworker – Two Cylinder

The Geka Hydracrop 55 Ironworker is a 2 Cylinder Hydraulic Ironworker machine with 2 Working Areas and 5 workstations.

Hydracrop 55 is a punching, angle cutting and shearing machine that is part of Geka´s two-cylinder Ironworker machines Hydracrop series.

Hydracrop 55 is an Ironworker machine with 2 Cylinders. This means that it can be used by two workers at the same time to complete two different Ironworking tasks such as punching and shearing at once. Hydracrop 55 also has 5 different workstations for each ironworking tasks that it can complete:

Punching station

  • Independent guided punching cylinder with anti-rotation mechanism and room for optional or customized tools to be installed.

Angle shearing

  • Cutting angles without deformation or material loss with a patented rectilinear motion system.

Flat bars shearing

  • Cutting in a progressive manner with minimal distortion. Cutting angles in flat bars station is possible.

Bars cutting

  • Shearing of solid round and square bars and a variety of profiles, such as UPN, UPE, IPN, and IPE.

Notching

  • Rectangular Notching Station with notching of tubes or triangles as an option.

Hydracrop 55 versions:
Hydracrop 55 has 2 versions that differ on the dimensions of its punching throat, these are:

  • S Version: 250 mm Standard Throat.
  • SD Version: 500 mm Extended Throat.

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request formfor more information on the Geka Hydracrop 55 Ironworker.

Geka Hydracrop 55 Ironworker - Two Cylinder

FEATURES +
  • Punching (550 kN power)
  • Notching
  • Shear of iron section L
  • Shear of flatbar
  • Cut of round and square bars

Two versions are available on every model: S, SD

“S” Version

  • Machines driven by two cylinders.
  • 5 work stations, fitted with tools for L , shearing, round and square bars, rectangular notching and punching
  • Quick change punch
  • Flat bar shearing table with adjustable guides
  • 2 simultaneous work stations
  • Greater speed backed by a powerful hydraulic unit.
  • Special equipment for approaching at reduced pressure and slow speed.
  • Precision punching table with X & Y measuring stops.
  • Precision notching table with X & Y measuring stops
  • Ready for production pack comprising: One meter “touch & cut” length stop with fine adjusting, lamp for enhanced vision of cutting zones, 10 sets of round punches and dies

“SD” Version

  • The same features as the S version, but with a deeper throat for larger plate and sheet metal applications.
SPECS+
Punching Power 55 tons
Punch Stroke Per Min. 37
Motor 8.5 HP
Approx. Weight with Production Pack S: 3,065 lbs | SD: 3,860 lbs
Packaging Dimensions S: 67-3/4″ x 45-5/8″ x 82-1/4″ | SD: 82-5/8″ x 45-5/8″ x 82-1/4″
MEDIA+

Please call for more information on the Geka Ironworker 1 (800) 286-3624

OPTIONS +

Please call for more information on the Geka Ironworker 1 (800) 286-3624

Description

The Geka Hydracrop 55 Ironworker is a 2 Cylinder Hydraulic Ironworker machine with 2 Working Areas and 5 workstations.

Hydracrop 55 is a punching, angle cutting and shearing machine that is part of Geka´s two-cylinder Ironworker machines Hydracrop series.

Hydracrop 55 is an Ironworker machine with 2 Cylinders. This means that it can be used by two workers at the same time to complete two different Ironworking tasks such as punching and shearing at once. Hydracrop 55 also has 5 different workstations for each ironworking tasks that it can complete:

Punching station

  • Independent guided punching cylinder with anti-rotation mechanism and room for optional or customized tools to be installed.

Angle shearing

  • Cutting angles without deformation or material loss with a patented rectilinear motion system.

Flat bars shearing

  • Cutting in a progressive manner with minimal distortion. Cutting angles in flat bars station is possible.

Bars cutting

  • Shearing of solid round and square bars and a variety of profiles, such as UPN, UPE, IPN, and IPE.

Notching

  • Rectangular Notching Station with notching of tubes or triangles as an option.

Hydracrop 55 versions:
Hydracrop 55 has 2 versions that differ on the dimensions of its punching throat, these are:

  • S Version: 250 mm Standard Throat.
  • SD Version: 500 mm Extended Throat.

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request formfor more information on the Geka Hydracrop 55 Ironworker.

© Copyright 2024, Ocean Machinery Inc.