Nitto Kohki UOJ-5500
Mag Drill

The Nitto Kohki UOJ-5500 Mag Drill is the world’s first manual mag drill with “smart-stop / rapid-restart” technology. The Nitto Kohki UOJ-5500 is designed to use Jetbroach carbide tipped annular cutters.

As the drilling load increases, the load indicator will change in color from green to orange to red. In addition, if excessive feeding force is applied, the load indicator will rapidly blink red and the rotation of the drill motor will slow down and temporarily stop. If the load is released while the load indicator is blinking red, the drill motor will resume its rotation.

2-3/16″ x 3″ hole capacity

Accessories Included:

  • UEA0850-0 pilot pin 5/16″ x 2″ DOC
  • 3 mm allen wrench
  • 5 mm allen wrench
  • 8 mm x 10 mm combination spanner
  • Motor side handle
  • Feed handles (3 each)
  • Chip guard assembly
  • Safety chain
  • Molded plastic carrying case
  • Sample Cutting Fluid

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the Nitto Kohki UOJ-5500 Mag Drill.

Nitto Kohki UOJ-5500
Mag Drill

FEATURES+
  • 2-3/16″ x 3″ hole drilling capacity
  • Uses Jetbroach carbide tipped annular cutters
  • Light weight 39.6 lbs
  • Powerful two speed motor with 350/650 rpm gear box
  • Sealed arbor with through spindle coolant
  • Built-in coolant reservoir
  • Overload indicator
  • Gradual overload sensor
  • Rapid restart mechanism
  • One-touch arbor system
  • Built-in circuit prevents accidental restarts
SPECS+
Power Source 115 V AC 50/60 Hz
Rated Power Consumption 1,150 W
Hole Cutting Dia. 2-3/16″ Max.
Magnet Holding Power 2,249 lbs
Magnet Dimensions 3-3/8″ x 6-11/16″
Weight 39.6 lbs
MEDIA+

Please call for more information about Nitto Kohki Mag Drills1 (800) 286-3624

OPTIONS+

Please call for more information about Nitto Kohki Mag Drills1 (800) 286-3624

Description

The Nitto Kohki UOJ-5500 Mag Drill is the world’s first manual mag drill with “smart-stop / rapid-restart” technology. The Nitto Kohki UOJ-5500 is designed to use Jetbroach carbide tipped annular cutters.

As the drilling load increases, the load indicator will change in color from green to orange to red. In addition, if excessive feeding force is applied, the load indicator will rapidly blink red and the rotation of the drill motor will slow down and temporarily stop. If the load is released while the load indicator is blinking red, the drill motor will resume its rotation.

2-3/16″ x 3″ hole capacity

Accessories Included:

  • UEA0850-0 pilot pin 5/16″ x 2″ DOC
  • 3 mm allen wrench
  • 5 mm allen wrench
  • 8 mm x 10 mm combination spanner
  • Motor side handle
  • Feed handles (3 each)
  • Chip guard assembly
  • Safety chain
  • Molded plastic carrying case
  • Sample Cutting Fluid

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the Nitto Kohki UOJ-5500 Mag Drill.

© Copyright 2024, Ocean Machinery Inc.