The Amada H1000II Band Saw is a Horizontal Semi-Automatic Metal Cutting Band Saw
Material Size: Round 15.7" - 40", Rectangle Max. 44" x 40"
Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the Amada Band Saw H1000II.
|Cutting Capacity - Round (diameter)||15.7" - 40" (400 - 1000 mm)|
|Cutting Capcity - Rectangle (W x H)||44" x 40" (400 x 400 mm - 1100 x 1000 mm)|
|Work Load Capacity||33,069 lbs (15,000 kg)|
|Blade Dimensions||36'5" x 0.063" x 3" (11,100 x 1.6 x 80 mm)|
|Blade Speed||50 - 230 ft./mn, by Inverter (15 - 70 m/mn, by Inverter)|
|Vise Operation Type||Hydraulic Full-Stroke Cylinder|
|Blade Saw Motor||15 HP (11 kW)|
|Hydraulic Pump Motor||5 HP (3.7 kW)|
|Cutting Fluid Pump Motor||1/4 HP (0.2 kW)|
|Power Supply Voltage||AC220?10%, 3 PH, 60 Hz (All other voltages require transformer.)|
|Power Requirement||26 kVA|
|Cutting Fluid Tank Capcity||66 gal (250 Liters)|
|Cutting Fluid Pump Type||Electric|
|Hydraulic Tank Capcity||40 gal (150 Liters)|
|Chip Disposal||Chip Conveyor|
|Material Index Mechanism||Gripper Vise, Semi-Automatic|
|Stroke||19.7" (Manual) 500 mm (Manual)|
|Machine Dimensions - Head Up Position||213.3" x 130.7" x 150.6" (5413 x 3321 x 3824 mm)|
|Machine Dimensions - Head Down Position||213.3" x 130.7" x 121.1" (5413 x 3321 x 3075 mm)|
|Table Height (Above Floor)||33.5" (850 mm)|
|Machine Weight||30,800 lbs (14,000 kg)|
Please call for more information about Amada Band Saw H1000II 1 (800) 286-3624
Options for Amada Band Saws:
AXCELA G SERIES Band Saw Blades
High-performance Carbide Tipped Band Saw Blades
BCTBR Band Saw Blade
Multi Faceted Carbide Tipped Blade
Designed exclusively for heat-resistant alloys, nickel-based alloys, titanium alloys, and special cast tensile steels, all with high tensile strength of over 142,000 psi. It features ultra-hard, diamond sharp carbide tipped teeth that resist low thermal conductivity and abrasion that can quickly break down conventional bi-metal type bands.
MAGNUM HI-LO Band Saw Blade
Patented Varying Tooth Height and Set M-71 Bi-metal Blade
Hi-Lo Band Saw Blade
Varying Tooth Height Design, M-42 Welded Edge
The Hi-Lo blade features a high and low teeth height design and a 15-degree rake angle. The blade is ideal for cutting hard steels.
CHIP BREAKER Band Saw Blade
Patented Gullet Design
SGLB Band Saw Blade
M-42 Bi-metal Blade
The SGLB was designed to cover a broad range of cutting applications and to provide maximum efficiency in sawing wear-resistant tool steels. The blade's tough M-42 cobalt edge resists heat and abrasion, while the varied pitch tooth form expands the ranges of sizes and shapes that can be sawed successfully without changing blades.
COBALT8 Band Saw Blade
Amada Modified M42 High-Speed Steel Bi-Metal Blade
SMARTCUT BAND Band Saw Blade
Thinner Blade of SGLB and Magnum Hi-Lo
Thinner more than 10% from regular SGLB or Magnum Hi-Lo. Specialized Blade for PCSAW330
PROTECTOR EX M42 Band Saw Blade
Exclusive use for structural steel with M-42 Edge. Which has both strength against tooth chipping and high wear resistance. PROTECTOR EX added to the back face of the tooth tip prevents excessive cutting.
PROTECTOR Band Saw Blade
Exclusive Use for Structual Steel with M-30 Matrix Bi-metal Blade
Exclusive use for structural steel. Protector provides long blade life and prevents tooth breakage, eliminating excessive tooth stripping. It can withstand the shock of interrupted cuts, allowing for heavier penetration for faster cutting rates. Protector uses a broaching style set pattern designed to eliminate pinching, which prevents the blade from binding the cut.
MGLB Band Saw Blade
The MGLB is best suited for cutting structural shapes, tubing and stacks of mild steel pieces. The MGLB allows band saw machines to cut a wide range of material sizes and shapes without requiring a change of blades. Its tough high-speed steel teeth resist chipping, stripping and abrasion. It can also tolerate the occasional improper speeds and feeds that are often used by inexperienced saw operators.