Amada HKA400 Band Saw

FEATURES+

8 Degrees Saw Head Cant
60 Degree Miter Capability
Auto Index, Only at 0?
Direct Drive
Full Stroke Vise
Inverter Blade Speed Control
Light Beam Marking
Post Construction Type Saw Head

SPECS+

Cutting Capacity – Round (diameter)	12.6″ (at 90?) 320 mm (at 90?) 8.9″ (at 45?) 200 mm (at 45?) 3.9″ (at 60?) 100 mm (at 45?)
Cutting Capcity – Rectangle (W x H)	16″ x 11″ (at 90?) 400 x 280 mm (at 90?) 8.9″ x 11″ (at 45?) 200 x 280 mm (at 45?) 3.9″ x 11″ (at 60?) 100 x 280 mm (at 60?)
Work Load Capacity	880 lbs (400 kg)
Blade Dimensions	12’9″ x 0.042″ x 1-1/4 (3885 x 1.066 x 32 mm)
Blade Speed	100-325 ft./min, Inverter (30-100 m/min, Inverter)
Tension Control	Manual – Split Clutch
Vise Operation Type	Front and Main Vise
Blade Saw Motor	3 HP (2.2 kW)
Hydraulic Pump Motor	1 HP (0.75 kW)
Cutting Fluid Pump Motor	1/10 HP (0.06 kW)
Power Supply Voltage	AC220V?10%, 3 PH, 60 Hz All other Voltages Require Transformer
Power Requirement	10.7 kVA
Cutting Fluid Tank Capcity	10.7 gal (40 Liters)
Cutting Fluid Pump Type	Electric
Hydraulic Tank Capcity	10.7 gal (40 Liters)
Chip Disposal	Manual
Material Index Mechanism	Shuttle Vise
Stroke	15.7″ (400 mm)
Machine Dimensions – Head Up Position	84.3″ x 92.3″ x 73.4″ (2140 x 2345 x 1865 mm)
Machine Dimensions – Head Down Position	84.3″ x 92.3″ x 64.0″” (2140 x 2345 x 1625.5 mm)
Table Height (Above Floor)	30.3″ (770 mm)
Machine Weight	3,528 lbs (1,600 kg)

MEDIA+

Please call for more information about Amada band Saw Model HKA400 1 (800) 286-3624

OPTIONS+

	AXCELA G SERIES Band Saw Blades High-performance Carbide Tipped Band Saw Blades High-quality carbide tips and the dove tail tooth shape. AXCELA makes incredible cutting speed for hard to cut material.
	BCTBR Band Saw Blade Multi Faceted Carbide Tipped Blade Designed exclusively for heat-resistant alloys, nickel-based alloys, titanium alloys, and special cast tensile steels, all with high tensile strength of over 142,000 psi. It features ultra-hard, diamond sharp carbide tipped teeth that resist low thermal conductivity and abrasion that can quickly break down conventional bi-metal type bands.
	MAGNUM HI-LO Band Saw Blade Patented Varying Tooth Height and Set M-71 Bi-metal Blade High-quality carbide tips and the dove tail tooth shape. AXCELA makes incredible cutting speed for hard to cut material.
	Hi-Lo Band Saw Blade Varying Tooth Height Design, M-42 Welded Edge The Hi-Lo blade features a high and low teeth height design and a 15-degree rake angle. The blade is ideal for cutting hard steels.
	CHIP BREAKER Band Saw Blade Patented Gullet Design Designed to reduced heat generated at increased chip load. With reduced tooth stripping and breaking this equates to the lowest possible cost per square inch of metal cutting.
	SGLB Band Saw Blade M-42 Bi-metal Blade The SGLB was designed to cover a broad range of cutting applications and to provide maximum efficiency in sawing wear-resistant tool steels. The blade’s tough M-42 cobalt edge resists heat and abrasion, while the varied pitch tooth form expands the ranges of sizes and shapes that can be sawed successfully without changing blades.
	COBALT8 Band Saw Blade Amada Modified M42 High-Speed Steel Bi-Metal Blade General-purpose blade ideal for cutting mild steel and structural steel. “Chip Curler” tooth shape and unique set pattern result in longer blade life.
	SMARTCUT BAND Band Saw Blade Thinner Blade of SGLB and Magnum Hi-Lo Thinner more than 10% from regular SGLB or Magnum Hi-Lo. Specialized Blade for PCSAW330
	PROTECTOR EX M42 Band Saw Blade Exclusive use for structural steel with M-42 Edge. Which has both strength against tooth chipping and high wear resistance. PROTECTOR EX added to the back face of the tooth tip prevents excessive cutting.
	PROTECTOR Band Saw Blade Exclusive Use for Structual Steel with M-30 Matrix Bi-metal Blade Exclusive use for structural steel. Protector provides long blade life and prevents tooth breakage, eliminating excessive tooth stripping. It can withstand the shock of interrupted cuts, allowing for heavier penetration for faster cutting rates. Protector uses a broaching style set pattern designed to eliminate pinching, which prevents the blade from binding the cut.
	MGLB Band Saw Blade General Purpose Matrix Bi-metal Blade The MGLB is best suited for cutting structural shapes, tubing and stacks of mild steel pieces. The MGLB allows band saw machines to cut a wide range of material sizes and shapes without requiring a change of blades. Its tough high-speed steel teeth resist chipping, stripping and abrasion. It can also tolerate the occasional improper speeds and feeds that are often used by inexperienced saw operators.

Description

The Amada HKA400 Band Saw is a Horizontal Automatic Metal Cutting Miter Band Saw.

Miter Cutting Band Saw specifically designed for cutting structural steel sections.

3 H.P.
1 1/4” Blade
Metal Cutting

Saw Head Frame

The rigid ‘C’ section frame carries the mountings for the two band wheels, heavy-duty worm drive gear reducer, the band drive motor, and saw guide arm mounting supports.

Band Wheels & Drive System

The inverter-controlled band drive motor is directly coupled to the worm gear reducer eliminating friction losses of a variable speed pulley drive. The drive wheel transmission is designed and manufactured by Amada to provide a high-efficiency speed reduction, which requires no external cooling to deliver more power to the drive wheel. Band speed is set using the band speed adjustment knob on the control panel.

Canted Head and Single Column Mounting

The head is canted 8° to enable the machine to cut rolled sections e.g. I beams or rectangular tubing at significantly faster rates because the blade is never in full contact with the horizontal section of the material. The single-column mounting enables the saw guides to be much closer together compared to scissor-type machines which improve the cutting performance.

Full Stroke Clamping Vise

The full stroke clamping vise reduces the operator’s setup time for different widths of material.

Manual Vise Inching Control

The vise inching control enables the operator to more accurately locate the workpiece for the cut because he can inch the vise until it is just touching the material but not clamped hard. Then with the help of the shadow line projector, make any small adjustment to the position to produce the desired cut.

Guarding

The saw band is constrained within the heavy gage guarding in all non-cutting areas.

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the Amada HKA400 Band Saw.

Amada HKA400
Band Saw