Slugger JHM Holemaker II

The Slugger JHM Holemaker II is a reliable, powerful drill capable of mag base drilling up to 1-3/8 inch holes, 2 inches deep. The small size and low weight make it ideal for continual use on the job site.
Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the SLUGGER MAG DRILL.

Slugger JHM Holemaker II

FEATURES+
  • Full featured, professional drill
  • Compact 30 lb (13.6 kg) package for versatility and convenience
  • Spindle support maintains hole tolerances
  • Illuminated control panel
  • Concealed motor wiring
  • Right or left hand feed handles
  • Rail slide system
  • Contact and chip guard
  • Gravity-fed coolant system
  • MagBotTM removable coolant bottle
  • Spring arbor for slug ejection

We offer very attractive prices for Internet purchases of Annular Cutters – Please call for prices!

SPECS+
Dimensions and Specifications:
Height 14″ minimum (356mm)
Width 7-3/4″ minimum (197mm)
Length 13-3/4″ (349mm)
Weight 30 lbs. (13.7kg)
Drill Motor .75 HP 1380W (single phase) 120V / 11.5 ~ 240V / 5.7A 330 RPM (load)
Drill point breakaway 670 lbs. on 1″ plate
Magnet base dimensions 3-3/4″ x 7″ (95mm x 178mm)
Magnet Dead Lift 1700 lbs. on 1″ plate
Arbor Bore 3/4″ (19.05mm)
Slugger Cutter Diameter 1-3/8″ (35mm)
Slugger Cutter Depth of Cut 2″ (50mm)
C/L Spindle to Magnet Face 1-7/8″ (48mm)
C/L Spindle to Motor Face 1-1/2″ (38mm)
MEDIA+

Please call for more information about slugger mag drill (800) 286-3624

We offer very attractive prices for Internet purchases of Annular Cutters – Please call for prices!

OPTIONS+
Product Summary Applications
3/4″ Shank Annular Cutters
With their unique centerfree design, Slugger annular cutters cut only the periphery of the hole, ejecting the remaining center as a slug. These cutters produce reamed quality, burr-free holes in one operation, eliminating costly pilot holes and step drilling. Slugger cutters reduce torque and horsepower requirements by only cutting the periphery of the hole using the proper tooth geometry.
  • Steel Fabricators
  • Bridge Building
  • Ship Building
  • Steel Erectors
  • Maintenance Departments
  • Truck & Trailer Mfg.
  • Refineries
  • Power Plants
3/4″ Shank Cutter Sets With their unique centerfree design, Slugger annular cutters cut only the periphery of the hole, ejecting the remaining center as a slug. These cutters produce reamed quality, burr-free holes in one operation, eliminating costly pilot holes and step drilling. Slugger cutters reduce torque and horsepower requirements by only cutting the periphery of the hole using the proper tooth geometry.
  • Steel Fabricators
  • Bridge Building
  • Ship Building
  • Steel Erectors
  • Maintenance Departments
  • Truck & Trailer Mfg.
  • Refineries
  • Power Plants
Sheet Metal Cutters
Thin metal cutters produce infinitely more accurate holes than common bi-metal hole saws. Designed for use with hand held drilling equipment, these cutters drill up to three times faster than hole saws and have superior tool life. Centerfree design eliminates deflection and leaves smooth bore in work piece. Provided arbor system quickly installs to most hand drills, accepting a full range of cutters. Ideal for HVAC, electric and maintenance contractors.
  • Sheet metal
  • Light tubing
  • Rubber
  • Fiber materials
  • Sheet plastics.
Sheet Metal Cutter Sets
Thin metal cutters produce infinitely more accurate holes than common bi-metal hole saws. Designed for use with hand held drilling equipment, these cutters drill up to three times faster than hole saws and have superior tool life. Centerfree design eliminates deflection and leaves smooth bore in work piece. Provided arbor system quickly installs to most hand drills, accepting a full range of cutters. Ideal for HVAC, electrical and maintenance contractors.
  • Sheet metal
  • Light tubing
  • Rubber
  • Fiber materials
  • Sheet plastics
ShortSlugger? Annular Cutters
Capable of drilling materials up to 3/4″ thick, ShortSluggers? compact design and 1/2″ shank drive conveniently slips into the drive arbor, adapting quickly to magnetic drills and stationary drill presses. One pilot pin accommodates all cutters, which remains concentric with the arbor drive. ShortSlugger annular cutters may be better suited for certain applications.
  • Steel Fabricators
  • Bridge Building
  • Ship Building
  • Steel Erectors
  • Maintenance Departments
  • Truck and Trailer
  • Refineries
  • Power Plants
ShortSlugger Annular Cutter Sets
Convenient sets of ShortSlugger annular cutters that include the drive arbor. Capable of drilling materials up to 5/8″ thick, ShortSluggers? compact design and 1/2″ shank drive conveniently slips into the drive arbor, adapting quickly to magnetic drills and stationary drill presses. One pilot pin accommodates all cutters, which remains concentric with the arbor drive. ShortSlugger annular cutters may be better suited for certain applications.
  • Steel Fabricators
  • Bridge Building
  • Ship Building
  • Steel Erectors
  • Maintenance Departments
  • Truck and Trailer
  • Refineries
  • Power Plants
Tap Size Annular Cutters
Tap Size Annular Cutters are Slugger annular cutters that are sized specifically to allow the hole to then be tapped to a desired size.
  • Cutting a hole to
    correspond to a
    specific tap size.
Rail Cutters
Specifically designed for rail drilling. This annular cutters unique design and specially developed coating allow for faster drilling and longer life, even in the toughest rail.
  • Train Rail
  • Crane Rail
Carbide Tipped Cutters
Heavy-duty carbide tips and multiple cutting edge geometry increase hole drilling productivity. deal for select drilling applications, carbide tipped annular cutters adapt quickly to most drill presses and magnetic based drills. Carbide annular cutters allow for increased cutting speeds and increased feed rates.
  • Stainless Steel
  • Harder Alloys
Carbide Tipped Cutter Sets
Heavy-duty carbide tips and multiple cutting edge geometry increase hole drilling productivity. Ideal for select drilling applications, carbide tipped annular cutters adapt quickly to most drill presses and magnetic based drills. Carbide cutters allow for increased cutting speeds and increased feed rates.
  • Stainless Steel
  • Harder Alloys
Carbide Sheet Metal Cutters
Carbide sheet metal cutters are ideal for hand held or drill press applications on stainless steel, brass or structural steel. These heavy-duty carbide tipped cutters outperform high speed steel and bi-metal cutters in certain applications. 1/2″ shanks and chucking flats make hand held perations easy. Carbide cutters allow for increased cutting speeds and increased feed rates.
  • Stainless Steel
  • Harder Alloys
Weldon Shank Annular Cutters
Weldon Shank Annular Cutters are Slugger Cutters with a 1-1/4″ Weldon shank for cutting large diameter holes where more torque is generated.
  • CNC Machines
  • Drill Presses
  • Bridgeports
Annular Cutter Options
This is a list of available options for Slugger Annular Cutters to increase efficiency when cutting specific materials. Consult Jancy for the correct cutter option for your application.

TINI (Titanium Nitride)
TICN (Titanium Carbonitride)
M42 Cobalt Steel
ID Sharpened
Pipe-Style Geometry
Truck Frame

  • Brass
  • Aluminum
  • Steel
  • Stacked plate
  • Pipe

Description

The Slugger JHM Holemaker II is a reliable, powerful drill capable of mag base drilling up to 1-3/8 inch holes, 2 inches deep. The small size and low weight make it ideal for continual use on the job site.
Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the SLUGGER MAG DRILL.

© Copyright 2021, Ocean Machinery.