The KMT H 400 SA fully hydraulic Semi-Automatic bandsaw offers increased productivity with full cycle operation. Mitering 45 to the left and 60 degrees to the right.
With the push of the start button or a click of the optional footswitch the vise will clamp the sawhead will make the cut, the head will return to just above the material and the vise will un-clamp.
Standard features of the KMT H 400 SA include, variable speed, easy operator controls, vise mounted on a rail with quick handle for moving to either side of the cut, amp meter.
Material sensor, saw will rapid down until it touches mate-rial then go into controlled rate. After cut is complete the sawhead will lift to just above the material ready for the next cut. Large easy to read scale to accurate miters.
Quick release handle not only move the vise in and out but also left and right.
Carbide guides w/ rollers.
- One Bi-metal sawblade
- Low voltage control
- TEFC 3 phase drive motor
- Totally enclosed worm gear transmission
- Full Coolant System
- Full Blade Guarding
- Operators Manual Parts List/Schematics
- Tool kit
Capacities and Specifications
Capacities shown for the KMT H 400 SA are max envelope. Each individual cutting job must be considered with regards to type and shape of material, and quantity of pieces per day. (see specs tab below)