Steelmax D300XT Mag Drill

The D300XT is a variable speed drilling machine designed to drill holes with diameters of up to 2-3/4″ (70mm) by using annular cutters. The machine can also drill holes with diameters of up to 1″ ( 25mm) by using twist drill bits. The D300XT can change the direction of rotation. This allows tapping of pre-drilled holes by using a tap chuck. The electromagnetic base clamps the machine to ferromagnetic surfaces, making sure that the operator is safe and the machine works correctly. A safety strap protects the machine from falling in case of a clamping loss. Accessories allow you to drill in pipes and cut threads.

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or click button below to receive more information on Steelmax Mag Drills.

Steelmax D300XT Mag Drill

FEATURES+
  • 360- degree visual monitoring system indicates current condition of the drill and gives safety
    and diagnostic information, e.g. worn brushes
  • 1600 W motor
  • Overload & Overheat protection
  • Tapping of through and blind holes with intelligent load control
  • Drilling with both TCT & HSS cutters and twist
    drill bits from small up to large diameters
  • Full electronic motor control
  • Electronic clutch (faster than mechanical)
  • Rigid design extends tool life
  • Innovative smart magnet with reduced weight
  • Intuitive control panel at top of the drill
  • Large coolant reservoir
SPECS+
Motor Speeds (under load) 120-190 rpm (gear 1) – 290-450 rpm (gear 2)
Motor Power 1600 W
Weight 40 lbs (18 kg)
Max Milling Capacity 2-3/4″ (70mm)
Max Drilling Capacity 1″ (25mm)
Max Depth of Cut 2-15/16″ (75mm)
Max Tap Size M20 (7/8″)
Stroke 7-1/2″ (190mm)
Voltage 115V/50-60 Hz
230V/50-60 Hz
Magnetic Clamping Force (thickness of 25mm – Ra=1.25) 2472 ft lbs (1121 kG)
Magnet Base Dimensions 3.6″ x 7.1″ x 2.1″
(92mm x 180mm x 54mm)
Min Workpiece Thickness 0.3″ (8mm)
Spindle MT3
Tool Holder 3/4″ (19mm) Weldon

Please call for more information about the Steelmax D300XT Mag Drill 1 (800) 286-3624

MEDIA+

Please call for more information about the Steelmax D300XT Mag Drill 1 (800) 286-3624

OPTIONS+

Please call for more information about the Steelmax D300XT Mag Drill 1 (800) 286-3624

Description

The D300XT is a variable speed drilling machine designed to drill holes with diameters of up to 2-3/4″ (70mm) by using annular cutters. The machine can also drill holes with diameters of up to 1″ ( 25mm) by using twist drill bits. The D300XT can change the direction of rotation. This allows tapping of pre-drilled holes by using a tap chuck. The electromagnetic base clamps the machine to ferromagnetic surfaces, making sure that the operator is safe and the machine works correctly. A safety strap protects the machine from falling in case of a clamping loss. Accessories allow you to drill in pipes and cut threads.

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or click button below to receive more information on Steelmax Mag Drills.

© Copyright 2024, Ocean Machinery Inc.