Steelmax D500XT Heavy Duty Mag Drill

The D500XT drilling machine is suitable for many heavy-duty hole making and tapping applications. Powerful 2300 W, variable-speed motor enables cutting capacity up to 5″ (130 mm) and drilling capacity up to 1-5/8″ (42 mm). Forward and reverse functions allow tapping of pre-drilled holes up to 1-5/8″ (M42) by using the quick change tapping system by Steelmax.

4-speed gear and continuous speed adjustment help to set the optimal speed depending on diameter, material grade and tool in use. The intelligent speed control system maintains the constant speed regardless of the changing load and increases tool life. The innovative 360-degree visual monitoring system facilitates machine operation and increases work safety.

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or click the button below to receive more information on Steelmax Mag Drills.

Steelmax D500XT Heavy Duty Mag Drill

FEATURES+
  • 360- degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information, e.g. worn brushes
  • Very powerful 2300 W motor
  • Overload & Overheat protection
  • 4-Speed gear with continuous speed adjustment
  • Intelligent speed control system maintains stable speed regardless of load changes
  • Tapping of through and blind holes with intelligent load control
  • Drilling with both TCT & HSS cutters and twist drill bits from small up to large diameters
  • Full electronic motor control
  • Electronic clutch (faster than mechanical)
  • Rigid design extends tool life
  • Tilt sensor (gyroscopic) stops motor in case of machine break away
  • Innovative smart magnet with reduced weight
  • Intuitive control panel at top of the drill
  • Large coolant reservoir
SPECS+
Motor Speeds (under load) 58-85 rpm (gear 1)
100-150 rpm (gear 2)
200-300 rpm (gear 3)
350-520 rpm (gear 4)
Motor Power 2300 W
Weight 68 lbs (31 kg)
Max Hole Size – Annular Cutter 5″ (130mm)
Max Drilling Capacity 1-5/8″ (42mm)
Max Depth of Cut 4″ (100mm)
Max Tap Size M42 (1-5/8″)
Stroke 10″ (260mm)
Voltage 115V/50-60 Hz
230V/50-60 Hz
Magnetic Clamping Force (thickness of 25mm – Ra=1.25) 5622 ft lbs (25000 N)
Magnet Base Dimensions 4-1/8″ x 12-3/8″ x 2″
(105mm x 315mm x 50mm)
Min Workpiece Thickness 3/8″ (10mm)
Spindle MT4
Tool Holder 3/4″ (19mm) or 1-1/4″ (32mm) Weldon

Please call for more information about the Steelmax D500XT Mag Drill 1 (800) 286-3624

MEDIA+

Please call for more information about the Steelmax D500XT Mag Drill 1 (800) 286-3624

OPTIONS+

Please call for more information about the Steelmax D500XT Mag Drill 1 (800) 286-3624

Description

The D500XT drilling machine is suitable for many heavy-duty hole making and tapping applications. Powerful 2300 W, variable-speed motor enables cutting capacity up to 5″ (130 mm) and drilling capacity up to 1-5/8″ (42 mm). Forward and reverse functions allow tapping of pre-drilled holes up to 1-5/8″ (M42) by using the quick change tapping system by Steelmax.

4-speed gear and continuous speed adjustment help to set the optimal speed depending on diameter, material grade and tool in use. The intelligent speed control system maintains the constant speed regardless of the changing load and increases tool life. The innovative 360-degree visual monitoring system facilitates machine operation and increases work safety.

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or click the button below to receive more information on Steelmax Mag Drills.

© Copyright 2024, Ocean Machinery Inc.