Baileigh Programmable Pipe Bender RDB-325

FEATURES+

Computer programmable
Programmer holds 170 jobs with 10-bends per job
Touch-screen
Can bend 360 degrees left or right (with optional tooling)
Six bending speeds
FAST… 10-seconds to 180 degrees
16.5″ (419mm) maximum centerline radius
Accepts optional positioning table
Portable

SPECS+

Mild Steel Pipe (Schedule 40)	2.00″ — 60mm x 5.5mm
Aluminum Pipe (Schedule 40)	2.50″ — 73mm x 5.5mm
Stainless Steel Pipe (Schedule 40)	2.00″ — 60mm x 4mm
Mild Steel Round Tube (Wall)	3.00″ (.095) — 76mm x 2.5mm
Aluminum Round Tube (Wall)	3.00″ (.203) — 76mm x 5mm
Stainless Steel Round Tube (Wall)	3.00″ (.095) — 76mm x 2.5mm
Chromolly Round Tube (Wall)	3.00″ (.083) — 76mm x 2mm
Mild Steel Rod	1.25″ (32mm)
Mild Steel Square Tube (Wall)	2.00″ (.125) — 50mm x 3mm
Minimum OD	.25″ — 6mm
Maximum Speed to 180 Degrees	10 Sec.
Maximum Center Line Radius (CLR)*	16.50″ (419mm)
Minimum CLR	.50″ (13mm)
Power Requirements	220V (1Ph)– 400V, 3Ph, 50Hz
Weight (lbs.)	1200 (545 kg.)
Length	60.00″ (1524mm)
Width	32.00″ (813mm)
Height	48.00″ (1220mm)

MEDIA+

Video of the Baileigh Programmable Tube Bender RDB-325:

OPTIONS+

Options for Baileigh Industrial Tube Benders:

Baileigh Rotary Positioning Table – IDX-10

What is the perfect complement to any computer controlled Baileigh Tube and Pipe Bender? A Rotary Positioning Table, of course.

A Baileigh Industrial tube bender fitted with a rotary positioning table allows for accurate bends in varying planes, as well as consistent measurements between bends. Available for the RDB-250, 325, and 350-TS, the tables are available in lengths of 5, 10, 15, and 20′, there is a table perfect for any size shop. Only have some jobs that would require the rotary indexing table, it can be attached or taken off of the bender with ease.

The table comes with an 8″ three jaw chuck with 2-1/2″ thru hole that allows for longer pieces of tubing than the table length. Chuck can handle up to 4-1/2″ OD. The minimum OD is 1/4″. The table has a linear indicator strip so the operator can set up accurate distances between bends. Mechanical stops can be positioned for the start of each bend. Using the mechanical stops is very beneficial for repeatability on bigger production runs. Another nice feature of the table is that the positioning carriage rolls on a precision V block rail and rides the rail using V-block bearings. These bearings are placed on eccentric shafts, which allows for tolerance adjustment allowing the most accurate results.

Please call for more information on Baileigh Programmable Tube Bender RDB-325 1 (800) 286-3624

Description

The Baileigh Programmable Pipe Bender RDB-325 has a massive capacity of 2″ Schedule 80 pipe (Mild Steel T.S. 64,000 PSI) and 3″ round tubing with a 16″ maximum center lines depending on material OD. Tooling for the RDB-325 is the same high quality tooling that entire line of Baileigh Industrial top loading tube benders use and with over 5000 die sets available, there will be one for your application.

This pipe bender comes standard with a simple to use touch-screen controller that holds up to 170 programs with up to ten bends per program. If more memory is needed, a memory card (standard 2CB SD card, max) can be used to store programs as well.

16” maximum centerline radius depending on material OD.
Runs on 220-volt single-phase power, so it will work in almost any fabrication setting.
Rotates up to 360° degrees in either direction, ideal for rod applications if you use our optional universal bending plate.
Comes standard with a simple-to-use touchscreen controller.
Internal storage holds up to 170 programs of up to 10 bends per program.
Also accepts memory cards (standard 2CB SD card, max) to store programs.
Convenient foot pedal controls let you stop and start the machine while leaving your hands free.
Swing-away counter die system helps you save valuable time on tooling changes and increase your production.
Compatible with over 5,000 optional die and tooling sets available from Baileigh Industrial. There’s sure to be one that can fit your application!
You can add an optional indexing table to bend on varying planes and easily duplicate complex bends.
Covered by a 1-year parts warranty.
This tube bender includes lifetime technical support by phone from a team of reps with hands-on metalworking experience.

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the Baileigh Programmable Pipe Bender RDB-325.