Ocean Machinery

0

(954) 956-3131 request information

steelmax-mag-drill-300xt

Steelmax D300XT Mag Drill

The D300XT is a variable speed drilling machine designed to drill holes with diameters of up to 2-3/4″ (70mm) by using annular cutters. The machine can also drill holes with diameters of up to 1″ ( 25mm) by using twist drill bits. The D300XT can change the direction of rotation. This allows tapping of pre-drilled holes by using a tap chuck. The electromagnetic base clamps the machine to ferromagnetic surfaces, making sure that the operator is safe and the machine works correctly. A safety strap protects the machine from falling in case of a clamping loss. Accessories allow you to drill in pipes and cut threads.

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or click button below to receive more information on Steelmax Mag Drills.

Categories: Mag Drills, Steelmax Magnetic Drills

Steelmax D300XT Mag Drill

FEATURES+

360- degree visual monitoring system indicates current condition of the drill and gives safety
and diagnostic information, e.g. worn brushes
1600 W motor
Overload & Overheat protection
Tapping of through and blind holes with intelligent load control
Drilling with both TCT & HSS cutters and twist
drill bits from small up to large diameters
Full electronic motor control
Electronic clutch (faster than mechanical)
Rigid design extends tool life
Innovative smart magnet with reduced weight
Intuitive control panel at top of the drill
Large coolant reservoir

SPECS+

Motor Speeds (under load)	120-190 rpm (gear 1) – 290-450 rpm (gear 2)
Motor Power	1600 W
Weight	40 lbs (18 kg)
Max Milling Capacity	2-3/4″ (70mm)
Max Drilling Capacity	1″ (25mm)
Max Depth of Cut	2-15/16″ (75mm)
Max Tap Size	M20 (7/8″)
Stroke	7-1/2″ (190mm)
Voltage	115V/50-60 Hz 230V/50-60 Hz
Magnetic Clamping Force (thickness of 25mm – Ra=1.25)	2472 ft lbs (1121 kG)
Magnet Base Dimensions	3.6″ x 7.1″ x 2.1″ (92mm x 180mm x 54mm)
Min Workpiece Thickness	0.3″ (8mm)
Spindle	MT3
Tool Holder	3/4″ (19mm) Weldon

Please call for more information about the Steelmax D300XT Mag Drill 1 (800) 286-3624

MEDIA+

Please call for more information about the Steelmax D300XT Mag Drill 1 (800) 286-3624

OPTIONS+

Please call for more information about the Steelmax D300XT Mag Drill 1 (800) 286-3624

Description

Description

The D300XT is a variable speed drilling machine designed to drill holes with diameters of up to 2-3/4″ (70mm) by using annular cutters. The machine can also drill holes with diameters of up to 1″ ( 25mm) by using twist drill bits. The D300XT can change the direction of rotation. This allows tapping of pre-drilled holes by using a tap chuck. The electromagnetic base clamps the machine to ferromagnetic surfaces, making sure that the operator is safe and the machine works correctly. A safety strap protects the machine from falling in case of a clamping loss. Accessories allow you to drill in pipes and cut threads.

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or click button below to receive more information on Steelmax Mag Drills.

Similar products

© Copyright 2024, Ocean Machinery Inc.