Slugger USA-101

Slugger USA-101 mag drills offer dependability, safety and versatility. The USA-101 has available twist drill chuck and tapping head to enhance the versatility of this machine. Only Slugger offers integrated safety shields and “Smart magnet” circuitry that does not allow the drill motor to turn on in unsafe magnetic holding conditions. Smart Magnet circuitry will also shut down the drill motor in the unlikely case of the drill breaking away from the workpiece. The Slugger USA-101 portable magnetic drill is made in the USA.

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or click button below to receive more information on the Slugger Mag Drill.

Slugger USA-101

FEATURES+
  • More powerful 1.75 HP, 11.5A motor
  • Available in 120V or 240V
  • Lightweight at 29lbs.
  • 1-1/2″ Dia x 2″ DOC Slugger™ cutter capacity
  • Thru spindle coolant
  • Positive slug ejection arbor for 3/4″ Slugger™ shank cutters
  • Redesigned safety guard / chip breaker
  • SmartMagnet™ circuitry
  • New control panel w/ illuminated switches
  • Exclusive detachable power cord
  • Patented internal motor cord
  • Integrated coolant bottle w/ shut-off valve
  • Carrying case with additional storage
  • Hex feed shaft w/ reversible hub & handles
  • Ergonomic handles for transporting and positioning
SPECS+
Mag Drill Dimensions and Specifications:
Height 17-3/4″ (450MM)
Width 8″ (203MM)
Length 13-1/2″ (343MM)
Weight 29lbs. (13.15Kg)
Drill Motor 1.75HP 1380W (single phase) 120V / 11.5A, 450 RPM (no load)
Drill point breakaway 650lbs. on 1″ plate
Magnet base dimensions 3″ X 6-3/8″ (76MM X 162MM)
Magnet Dead Lift 1480lbs. on 1″ plate
Arbor Bore 3/4″
Slugger Cutter Hole Dia 1-1/2″ (38MM)
Slugger Cutter Depth of Cut 2″ max
Spindle CL to Guard Face 1-1/2″
Spindle CL to Magnet Face 1-1/2″
Total Travel 2-1/2?
MEDIA+

Please call for more information about slugger mag drill (800) 286-3624

We offer very attractive prices for Internet purchases of Annular Cutters – Please call for prices!

OPTIONS+
Product Summary Applications
3/4″ Shank Annular Cutters
With their unique centerfree design, Slugger annular cutters cut only the periphery of the hole, ejecting the remaining center as a slug. These cutters produce reamed quality, burr-free holes in one operation, eliminating costly pilot holes and step drilling. Slugger cutters reduce torque and horsepower requirements by only cutting the periphery of the hole using the proper tooth geometry.
  • Steel Fabricators
  • Bridge Building
  • Ship Building
  • Steel Erectors
  • Maintenance Departments
  • Truck & Trailer Mfg.
  • Refineries
  • Power Plants
3/4″ Shank Cutter Sets With their unique centerfree design, Slugger annular cutters cut only the periphery of the hole, ejecting the remaining center as a slug. These cutters produce reamed quality, burr-free holes in one operation, eliminating costly pilot holes and step drilling. Slugger cutters reduce torque and horsepower requirements by only cutting the periphery of the hole using the proper tooth geometry.
  • Steel Fabricators
  • Bridge Building
  • Ship Building
  • Steel Erectors
  • Maintenance Departments
  • Truck & Trailer Mfg.
  • Refineries
  • Power Plants
Sheet Metal Cutters
Thin metal cutters produce infinitely more accurate holes than common bi-metal hole saws. Designed for use with hand held drilling equipment, these cutters drill up to three times faster than hole saws and have superior tool life. Centerfree design eliminates deflection and leaves smooth bore in work piece. Provided arbor system quickly installs to most hand drills, accepting a full range of cutters. Ideal for HVAC, electric and maintenance contractors.
  • Sheet metal
  • Light tubing
  • Rubber
  • Fiber materials
  • Sheet plastics.
Sheet Metal Cutter Sets
Thin metal cutters produce infinitely more accurate holes than common bi-metal hole saws. Designed for use with hand held drilling equipment, these cutters drill up to three times faster than hole saws and have superior tool life. Centerfree design eliminates deflection and leaves smooth bore in work piece. Provided arbor system quickly installs to most hand drills, accepting a full range of cutters. Ideal for HVAC, electrical and maintenance contractors.
  • Sheet metal
  • Light tubing
  • Rubber
  • Fiber materials
  • Sheet plastics
ShortSlugger? Annular Cutters
Capable of drilling materials up to 3/4″ thick, ShortSluggers? compact design and 1/2″ shank drive conveniently slips into the drive arbor, adapting quickly to magnetic drills and stationary drill presses. One pilot pin accommodates all cutters, which remains concentric with the arbor drive. ShortSlugger annular cutters may be better suited for certain applications.
  • Steel Fabricators
  • Bridge Building
  • Ship Building
  • Steel Erectors
  • Maintenance Departments
  • Truck and Trailer
  • Refineries
  • Power Plants
ShortSlugger Annular Cutter Sets
Convenient sets of ShortSlugger annular cutters that include the drive arbor. Capable of drilling materials up to 5/8″ thick, ShortSluggers? compact design and 1/2″ shank drive conveniently slips into the drive arbor, adapting quickly to magnetic drills and stationary drill presses. One pilot pin accommodates all cutters, which remains concentric with the arbor drive. ShortSlugger annular cutters may be better suited for certain applications.
  • Steel Fabricators
  • Bridge Building
  • Ship Building
  • Steel Erectors
  • Maintenance Departments
  • Truck and Trailer
  • Refineries
  • Power Plants
Tap Size Annular Cutters
Tap Size Annular Cutters are Slugger annular cutters that are sized specifically to allow the hole to then be tapped to a desired size.
  • Cutting a hole to correspond to a specific tap size.
Rail Cutters
Specifically designed for rail drilling. This annular cutters unique design and specially developed coating allow for faster drilling and longer life, even in the toughest rail.
  • Train Rail
  • Crane Rail
Carbide Tipped Cutters
Heavy-duty carbide tips and multiple cutting edge geometry increase hole drilling productivity. deal for select drilling applications, carbide tipped annular cutters adapt quickly to most drill presses and magnetic based drills. Carbide annular cutters allow for increased cutting speeds and increased feed rates.
  • Stainless Steel
  • Harder Alloys
Carbide Tipped Cutter Sets
Heavy-duty carbide tips and multiple cutting edge geometry increase hole drilling productivity. Ideal for select drilling applications, carbide tipped annular cutters adapt quickly to most drill presses and magnetic based drills. Carbide cutters allow for increased cutting speeds and increased feed rates.
  • Stainless Steel
  • Harder Alloys
Carbide Sheet Metal Cutters
Carbide sheet metal cutters are ideal for hand held or drill press applications on stainless steel, brass or structural steel. These heavy-duty carbide tipped cutters outperform high speed steel and bi-metal cutters in certain applications. 1/2″ shanks and chucking flats make hand held perations easy. Carbide cutters allow for increased cutting speeds and increased feed rates.
  • Stainless Steel
  • Harder Alloys
Weldon Shank Annular Cutters
Weldon Shank Annular Cutters are Slugger Cutters with a 1-1/4″ Weldon shank for cutting large diameter holes where more torque is generated.
  • CNC Machines
  • Drill Presses
  • Bridgeports
Annular Cutter Options
This is a list of available options for Slugger Annular Cutters to increase efficiency when cutting specific materials. Consult Jancy for the correct cutter option for your application.

TINI (Titanium Nitride)
TICN (Titanium Carbonitride)
M42 Cobalt Steel
ID Sharpened
Pipe-Style Geometry
Truck Frame

  • Brass
  • Aluminum
  • Steel
  • Stacked plate
  • Pipe

HOUGEN ROTABROACH ANNULAR CUTTERS

Hougen “12,000-Series” M2 H.S.S. Annular Cutters

For use on Hougen Portable Magnetic Drills and materials up to 350 BHN. Made of hardened, high speed tool steel and precision ground, cutters feature a 3/4″ diameter shank (Models 10915 and 10916 require adapter #02386) and are available in 1, 2, and 3″ D.O.C. Plus, modified end tooth geometry for stacked plate drilling is available.

Hougen RotaLoc and RotaLoc Plus Annular Cutters

For use exclusively in the HMD115 and HMD150 magnetic drills. Made of M42 H.S.S. the annular cutters have a bayonet style twist lock shank for fast tool change over requiring no tools to install in the drill’s arbor. For optimum cutter tool life and cutter efficiency use Slick-StikTM lubricant.

NITTO KOHKI JETBROACH ANNULAR CUTTERS

Nitto Kohki has developed the one-touch replacement system for Jetbroach carbide-tipped annular hole cutters. They are designed as one-touch types to be mounted and removed without the use of a tool. This reduces the time needed for hole cutting.

Nitto Kohki JetBroach Annular Cutters Features:

  • Single pass-cutting, no pilot hole required
  • Annular part does all the work so small cutting resistance reduces drilling time
  • Cutting of slated, elongated and edge holes is now possible
  • Fractional and metric cutter sizes to suit wide range of applications
  • Produces little slag and few chips for easy disposal
  • Carbide tips for sharp cutting edges
  • Can also be fitted to and used with previous Atra Ace models using a hexagon socket set-screw
  • Improved concentricity extends cutter life! Cutter holding system consisting of three balls inside the arbor body produces a self-centering effect during cutting to improve cutter performance and life.

We offer very attractive prices for Internet purchases of Annular Cutters – Please call for prices!

Description

Slugger USA-101 mag drills offer dependability, safety and versatility. The USA-101 has available twist drill chuck and tapping head to enhance the versatility of this machine. Only Slugger offers integrated safety shields and “Smart magnet” circuitry that does not allow the drill motor to turn on in unsafe magnetic holding conditions. Smart Magnet circuitry will also shut down the drill motor in the unlikely case of the drill breaking away from the workpiece. The Slugger USA-101 portable magnetic drill is made in the USA.

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or click button below to receive more information on the Slugger Mag Drill.

© Copyright 2024, Ocean Machinery Inc.