The KMT H 310 M & H 350 M are gravity fed autocut bandsaws capable of mitering 45 to the left and 60 degrees to the right.
The cycle start button is located in the trigger switch for safety.
The blade will tun off at the end of the cut. The solenoid will hold the sawframe where lifted. The Autocut will insure that each cut is feed exactly at the same rate, eliminating the need to open and close the valve each cut.
- One Bi-metal sawblade
- Low voltage control
- TEFC 3 phase drive motor
- Totally enclosed worm gear transmission
- Full Coolant System
- Full Blade Guarding
- Operators Manual Parts List/Schematics
- Tool kit
Capacities and Specifications
Capacities shown for the KMT H 310 M & H 350 M are max envelope. Each individual cutting job must be considered with regards to type and shape of material, and quantity of pieces per day. (see specs tab below)