Scotchman DO 8514-20M Ironworker

FEATURES +

Dual Operator allows for Two Operators to Work at the Same Time at Full Capacity
85 Ton Punch Station (1-1/16″ in 1″)
Keyed Punch Ram for Safety
14″ Throat Depth
Punch Gauging Table with Fence and Scale
Die Holder Complete with 2″ Die Insert for #82 Dies
Punch Nut with Wrench
Adjustable Swing-Away Stripper
One Round Punch & Die: Max. Dia. 1-1/4″
Punch Jog Control
Two Adjustable Electric Stroke Controls with Scale
Two Electric Remote Foot Pedals
Two 2-Stage Hydraulic Pumps
Two Valves
6″ x 6″ x 1/2″ Slug-less Angle Shear
Rectangle Notcher: 2″ x 4″ x 1/2″ can be converted to 3″ x 3″ V-Notcher 50-Ton Punch Station 6″ Open End Brake
20″ Flat Bar Shear (1″ x 16″, 3/4″ x 20″)
Shear Table with Miter Fence
Rod Shear: 1/2″, 3/4″, 1″, 1-1/2″ Round and 1-1/2″ Square
Slug Receptacles
Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations
230 or 460 Volt /3 ph Electrics (must specify voltage)
All Guards Necesary to Comply with ANSI B 11-5 Standards
Forklift Accommodations
Warranty: Three Years on Parts
Made in USA
Dual Operator, 5 Stations

SPECS+

Rated on:	65,000 PSI Tensile	A 36 Mild Steel
Punching Capacity	85 ton 1-1/16″ in 1″	77 mt 27 mm in 25 mm
Special Tooling	4″ Max. Dia.	200 mm Max. Dia.
Throat Depth	14″	350 mm
Flat Bar Shear	20″ Length 1″ x 16″ 3/4″ x 20″	500 mm 25 mm x 400 mm 19 mm x 500 mm
Angle Shear 90 Degrees	6″ x 6″ x 1/2″	150 mm x 150 mm x 13 mm
Angle Shear 45 Degrees (w/Bar Shear)	4″ x 4″ x 1/2″	100 mm x 100 mm x 13 mm
Brake 12″	85 ton	77 mt
Brake 24″	85 ton	77 mt
Open End Brake	5″ x 5/8″	125 mm x 16 mm
Pipe Notcher Schedule 40 I.D.	3/4″ 1″ 1-1/4″ 1-1/2″ 2″	19 mm 25 mm 32 mm 38 mm 50 mm
90° V. Notcher (Notcher Station)	6″ x 6″ x 5/16″	150 mm x 150 mm x 8 mm
Rectangle Notcher	2″ x 4″ x 1/2″	50 mm x 100 mm x 13 mm
90° V. Notcher (Notcher Station)	3″ x 3″ x 1/2″	75 mm x 75 mm x 12 mm
Punch Attachment (Notcher Station) Throat Depth w/Punch Attachment	50 ton 1-1/4″ in 1/2″ 4-7/16″	32 mm in 12 mm
Channel Shear	2″ x 6″ Adj.	50 mm to 150 mm Adj.
Strut Shear	Samples Required
Rod Shear Round Rod (Max.)Square Rod (Max.)	1/2″ 3/4″ 1″ 1-1/2″ 1-1/2″	13 mm 19 mm 25 mm 38 mm 38 mm
Square Tube Shear	1/2″ to 2″ 12 ga.	12 mm x 50 mm 2.75 mm
Offset Die Holder	Max. 40 ton	Max. 36 mt
Strokes Per Minute in Light Material	1/4″ Stroke (Punch Station)	48 spm
Strokes Per Minute in Heavy Material	3/4″ Stroke (Punch Station)	20 spm
Hydraulics	3,350/3,800 psi	231/262 bar
Motor Standard	10 hp 3 ph 230/460 208/380/575V	7.46 kW
Motor Optional	10 hp 1 ph 230V	7.46 kW
Dimensions	W-30″ L-70″ H-77″	W-750 cm L-1500 cm H-1925 cm
Shipping Weight	5,504 lbs.	2,496 kg

MEDIA+

Please call for more information on the Scotchman Ironworker 1 (800) 286-3624

OPTIONS +

	LED Light Available on punch station & shear station
	Mandrel Tube Punch (custom tooling) Other styles available in accessories/custom punch and die
	Double Tube Punch Custom built double tube punch
	Flatten and Trim Tube Punch (custom tooling) Other styles available in accessories/custom punch and dies
	Round Tube Punch (custom tooling) Other styles available in accessories/custom punch and dies
	Brake Table with Scale and Squaring Arm 12″ and 24″ Brakes Brake Length Gauge with Scale 12″ & 24″ Brakes
	12″ & 24″ Brake *Back Gauge sold separately.
	Open End Brake
	Pipe Notcher
	90° V-Notcher
	Channel Shear Blades
	Picket Tool
	Tube Shear
	Urethane Shear
	Open End Brake for Notcher End
	6″ x 6″ Die Holder
	Strut Shear
	Offset Die Holder
	48″ Back Gauge
	Optional Punch for Notcher End
	Punch Table Extension
	Multi-Loc Punch Gauging Table 36″ and 85″ Extensions Available
	24″ x 5′ Conveyor with Angle Iron Support attached to DO70/110
	Weld Coupon Bender

Description

If you are looking for a Fully-Integrated/Dual Operator ironworker that has more versatility than any other machine on the market, look no more! The Scotchman DO 8514-20M Ironworker is your machine!

The Scotchman DO8514-20M hydraulic ironworker is a fully-integrated ironworker machine with five built-in functions: 85-ton punch (1-1/16″ in 1″), 6″ x 6″ x 1/2″ crop off angle shear, round and square solid rod shear, 20″ flat bar shear (that will shear a whopping 1″ x 16″ and 3/4″ x 20″), plus a rectangle notcher.

The most flexible feature this machine has is the rectangle notcher which can be removed and turned into several additional tools that include the following: an extra punch station, press brake, pipe notcher and/or a 3″ x 3″ V notcher. No other machine built anywhere in the world has this much flexibility or versatility!

The DO 8514-20M hydraulic ironworker is 100% American-made and backed by Scotchman’s best in the business 3-year parts warranty.

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request formfor more information on Scotchman Ironworkers.

Scotchman DO 8514-20M Ironworker

Scotchman DO 8514-20M Ironworker

LED Light

Mandrel Tube Punch

Double Tube Punch

Flatten and Trim Tube Punch

Round Tube Punch

Brake Table with Scale and Squaring Arm

12″ & 24″ Brake

Open End Brake

Pipe Notcher

90° V-Notcher

Channel Shear Blades

Picket Tool

Tube Shear

Urethane Shear

Open End Brake for Notcher End

6″ x 6″ Die Holder

Strut Shear

Offset Die Holder

48″ Back Gauge

Optional Punch for Notcher End

Punch Table Extension

Multi-Loc Punch Gauging Table 36″ and 85″ Extensions Available

24″ x 5′ Conveyor with Angle Iron Support attached to DO70/110

Weld Coupon Bender

Description

Similar products

Scotchman 12012-24M Ironworker

Scotchman Porta Fab 45 Ironworker

Sunrise Single-Cylinder Ironworkers - Capacity: 50 - 66 Tons

Geka Ironworker - Hydracrop 110/180 Two Cylinder Ironworker