JME Short Slugger II

The Fein JME Short Slugger II is an endurance magnetic drill that drills up to 1-1/4″ (32mm).

Small, extremely lightweight 1-speed Endurance magnetic core drill with basic functionality for core drilling on the construction site.

  • For tough use, thanks to high-quality workmanship and internal motor cable routing.
  • Uncompromising service life through extra-durable gearbox design with up to 400 hours of operation time.
  • Lightweight with FEIN high-performance motor and high torque for all core drilling work.
  • Excellent price / performance ratio.
  • Easy to read convenient magnetic holding force display.
  • Motion sensor.
  • Internal cooling.
  • High magnetic holding force.
  • Hand feed wheel can be mounted on either side.
  • Good accessibility in cramped operating situations.
  • Personal safety switches.

Call the Ocean Machinery sales team TODAY at (954) 956-3131or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the Fein JME Short Slugger II mag drill.

JME Short Slugger II

FEATURES+
  • Magnet holding force display
  • Tilt sensor
  • Hand feed wheel can be mounted on either side

INCLUDES:

  • 1 coolant tank
  • 1 safety strap
  • 1 chip hook
  • 1 centering pin dia. 1/4 x 3-1/8″ [6.35 x 80 mm]
  • 1 centering pin dia. 1/4 x 4″ [6.35 x 100 mm]
  • 1 centering pin dia. 3/16 x 4 [4.75 x 100 mm]
  • 1 centering pin 3-1/4″ x 1/4″ [82 x 6.35 mm]
  • 1 chip guard
  • 1 Allen key 5 mm
  • 1 case
SPECS+
Dimensions and Specifications:
Power consumption 1,200 W
Power output 770 W
Full load speed 450 rpm
No load speed 700 m/min
Carbide cutter max dia 1-1/4″
HSS cutter max dia 1-1/4″
Cutter max drilling depth 2″
Cutter holder 3/4″ Weldon
Stroke 3-9/16″
Magnetic holding force 2248 lbs
Cable with plug 7.68″ (195mm)
Length in 10 ft

We offer very attractive prices for Internet purchases of Annular Cutters – Please call for prices!

MEDIA+

Please call for more information about JME Short Slugger II 1 (800) 286-3624

We offer very attractive prices for Internet purchases of Annular Cutters – Please call for prices!

OPTIONS+
Product Summary Applications
3/4″ Shank Annular Cutters
With their unique centerfree design, Slugger annular cutters cut only the periphery of the hole, ejecting the remaining center as a slug. These cutters produce reamed quality, burr-free holes in one operation, eliminating costly pilot holes and step drilling. Slugger cutters reduce torque and horsepower requirements by only cutting the periphery of the hole using the proper tooth geometry.
  • Steel Fabricators
  • Bridge Building
  • Ship Building
  • Steel Erectors
  • Maintenance Departments
  • Truck & Trailer Mfg.
  • Refineries
  • Power Plants
3/4″ Shank Cutter Sets With their unique centerfree design, Slugger annular cutters cut only the periphery of the hole, ejecting the remaining center as a slug. These cutters produce reamed quality, burr-free holes in one operation, eliminating costly pilot holes and step drilling. Slugger cutters reduce torque and horsepower requirements by only cutting the periphery of the hole using the proper tooth geometry.
  • Steel Fabricators
  • Bridge Building
  • Ship Building
  • Steel Erectors
  • Maintenance Departments
  • Truck & Trailer Mfg.
  • Refineries
  • Power Plants
Sheet Metal Cutters
Thin metal cutters produce infinitely more accurate holes than common bi-metal hole saws. Designed for use with hand held drilling equipment, these cutters drill up to three times faster than hole saws and have superior tool life. Centerfree design eliminates deflection and leaves smooth bore in work piece. Provided arbor system quickly installs to most hand drills, accepting a full range of cutters. Ideal for HVAC, electric and maintenance contractors.
  • Sheet metal
  • Light tubing
  • Rubber
  • Fiber materials
  • Sheet plastics.
Sheet Metal Cutter Sets
Thin metal cutters produce infinitely more accurate holes than common bi-metal hole saws. Designed for use with hand held drilling equipment, these cutters drill up to three times faster than hole saws and have superior tool life. Centerfree design eliminates deflection and leaves smooth bore in work piece. Provided arbor system quickly installs to most hand drills, accepting a full range of cutters. Ideal for HVAC, electrical and maintenance contractors.
  • Sheet metal
  • Light tubing
  • Rubber
  • Fiber materials
  • Sheet plastics
ShortSlugger? Annular Cutters
Capable of drilling materials up to 3/4″ thick, ShortSluggers? compact design and 1/2″ shank drive conveniently slips into the drive arbor, adapting quickly to magnetic drills and stationary drill presses. One pilot pin accommodates all cutters, which remains concentric with the arbor drive. ShortSlugger annular cutters may be better suited for certain applications.
  • Steel Fabricators
  • Bridge Building
  • Ship Building
  • Steel Erectors
  • Maintenance Departments
  • Truck and Trailer
  • Refineries
  • Power Plants
ShortSlugger Annular Cutter Sets
Convenient sets of ShortSlugger annular cutters that include the drive arbor. Capable of drilling materials up to 5/8″ thick, ShortSluggers? compact design and 1/2″ shank drive conveniently slips into the drive arbor, adapting quickly to magnetic drills and stationary drill presses. One pilot pin accommodates all cutters, which remains concentric with the arbor drive. ShortSlugger annular cutters may be better suited for certain applications.
  • Steel Fabricators
  • Bridge Building
  • Ship Building
  • Steel Erectors
  • Maintenance Departments
  • Truck and Trailer
  • Refineries
  • Power Plants
Tap Size Annular Cutters
Tap Size Annular Cutters are Slugger annular cutters that are sized specifically to allow the hole to then be tapped to a desired size.
  • Cutting a hole to
    correspond to a
    specific tap size.
Rail Cutters
Specifically designed for rail drilling. This annular cutters unique design and specially developed coating allow for faster drilling and longer life, even in the toughest rail.
  • Train Rail
  • Crane Rail
Carbide Tipped Cutters
Heavy-duty carbide tips and multiple cutting edge geometry increase hole drilling productivity. deal for select drilling applications, carbide tipped annular cutters adapt quickly to most drill presses and magnetic based drills. Carbide annular cutters allow for increased cutting speeds and increased feed rates.
  • Stainless Steel
  • Harder Alloys
Carbide Tipped Cutter Sets
Heavy-duty carbide tips and multiple cutting edge geometry increase hole drilling productivity. Ideal for select drilling applications, carbide tipped annular cutters adapt quickly to most drill presses and magnetic based drills. Carbide cutters allow for increased cutting speeds and increased feed rates.
  • Stainless Steel
  • Harder Alloys
Carbide Sheet Metal Cutters
Carbide sheet metal cutters are ideal for hand held or drill press applications on stainless steel, brass or structural steel. These heavy-duty carbide tipped cutters outperform high speed steel and bi-metal cutters in certain applications. 1/2″ shanks and chucking flats make hand held perations easy. Carbide cutters allow for increased cutting speeds and increased feed rates.
  • Stainless Steel
  • Harder Alloys
Weldon Shank Annular Cutters
Weldon Shank Annular Cutters are Slugger Cutters with a 1-1/4″ Weldon shank for cutting large diameter holes where more torque is generated.
  • CNC Machines
  • Drill Presses
  • Bridgeports
Annular Cutter Options
This is a list of available options for Slugger Annular Cutters to increase efficiency when cutting specific materials. Consult Jancy for the correct cutter option for your application.

TINI (Titanium Nitride)
TICN (Titanium Carbonitride)
M42 Cobalt Steel
ID Sharpened
Pipe-Style Geometry
Truck Frame

  • Brass
  • Aluminum
  • Steel
  • Stacked plate
  • Pipe

Hougen “12,000-Series” M2 H.S.S. Annular Cutters

For use on Hougen Portable Magnetic Drills and materials up to 350 BHN. Made of hardened, high speed tool steel and precision ground, cutters feature a 3/4″ diameter shank (Models 10915 and 10916 require adapter #02386) and are available in 1, 2, and 3″ D.O.C. Plus, modified end tooth geometry for stacked plate drilling is available.

Hougen RotaLoc and RotaLoc Plus Annular Cutters

For use exclusively in the HMD115 and HMD150 magnetic drills. Made of M42 H.S.S. the annular cutters have a bayonet style twist lock shank for fast tool change over requiring no tools to install in the drill’s arbor. For optimum cutter tool life and cutter efficiency use Slick-StikTM lubricant.

Click here for more information on the Hougen Rotabroach Annular Cutters.

NITTO KOHKI JETBROACH ANNULAR CUTTERS

Nitto Kohki has developed the one-touch replacement system for Jetbroach carbide-tipped annular hole cutters. They are designed as one-touch types to be mounted and removed without the use of a tool. This reduces the time needed for hole cutting.

Nitto Kohki JetBroach Annular Cutters Features:

  • Single pass-cutting, no pilot hole required
  • Annular part does all the work so small cutting resistance reduces drilling time
  • Cutting of slated, elongated and edge holes is now possible
  • Fractional and metric cutter sizes to suit wide range of applications
  • Produces little slag and few chips for easy disposal
  • Carbide tips for sharp cutting edges
  • Can also be fitted to and used with previous Atra Ace models using a hexagon socket set-screw
  • Improved concentricity extends cutter life!¬†Cutter holding system consisting of three balls inside the arbor body produces a self-centering effect during cutting to improve cutter performance and life.

We offer very attractive prices for Internet purchases of Annular Cutters – Please call for prices!

Description

The Fein JME Short Slugger II is an endurance magnetic drill that drills up to 1-1/4″ (32mm).

Small, extremely lightweight 1-speed Endurance magnetic core drill with basic functionality for core drilling on the construction site.

  • For tough use, thanks to high-quality workmanship and internal motor cable routing.
  • Uncompromising service life through extra-durable gearbox design with up to 400 hours of operation time.
  • Lightweight with FEIN high-performance motor and high torque for all core drilling work.
  • Excellent price / performance ratio.
  • Easy to read convenient magnetic holding force display.
  • Motion sensor.
  • Internal cooling.
  • High magnetic holding force.
  • Hand feed wheel can be mounted on either side.
  • Good accessibility in cramped operating situations.
  • Personal safety switches.

Call the Ocean Machinery sales team TODAY at (954) 956-3131or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the Fein JME Short Slugger II mag drill.

© Copyright 2023, Ocean Machinery Inc.