Scotchman DO95/140-24M Ironworker

FEATURES +

Dual Operator, 5 Stations
Dual Operator allows for Two Operators to Work at the Same Time at Full Capacity
95 Ton Punch Station (1-3/16″ in 1″)
Keyed Punch Ram for Safety
9″ Throat Depth
Punch Gauging Table with Fence and Scale
Die Holder Complete with 2″ Die Insert
Punch Nut with Wrench & Stripper
Adjustable Swing-Away Stripper
One Round Punch & Die: Max. Dia. 1-1/4″
Punch Jog Control
Two Adjustable Electric Stroke Controls with Scale
Two Electric Remote Foot Pedals
Two 2-Stage Hydraulic Pumps
Two Valves
Angle Shear Capacity 6″ x 6″ x 1/2″ at 90°
Rectangle Notcher 3″ x 4″ x 1/2″
Notcher Table with Guides
140 Ton, 24″ Flat Bar Shear with Sabre Blade (1″ x 8″, 3/8″ x 24″)
Shear Table with Miter Fence
Tool Table Work Area
Slug Receptacles
Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations
230/460 Volt/3 Phase Electrics (must specify voltage)
All Guards Necessary to Comply with ANSI B 11-5 Standards
Forklift Accommodations
Warranty: Three Years on Parts
Made in USA

SPECS+

Rated on:	65,000 PSI Tensile	A 36 Mild Steel
Punching Capacity	95 ton 1-3/16″ in 1″	86 mt 27 mm in 25 mm
Special Tooling	4″ Max. Dia.	100 mm thru 5.5 mm
Throat Depth	9″	225 mm
Flat Bar Shear (Sabre Blade Std)	140 ton 24″ Length 1″ x 8″ 3/4″ x 12″ 1/2″ x 16″ 3/8″ x 24″	127 mt 609 mm 25 mm x 203 mm 18 mm x 304 mm 12 mm x 406 mm 10 mm x 609 mm
Angle Shear 90 Degrees	6″ x 6″ x 1/2″	150 mm x 150 mm x 12 mm
Angle Shear 45 Degrees (w/Bar Shear)	3″ x 3″ x 3/8″ 4″ x 4″ x 1/2″	75 mm x 75 mm x 10 mm 100 mm x 100 mm x 12 mm
Brake 12″	80 ton	72.5 mt
Brake 24″	55 ton	50 mt
Open End Brake	Max. 1/4″ x 5″ Flat or Angle Iron	6 mm x 125 mm
Pipe Notcher Schedule 40 I.D.	3/4″ 1″ 1-1/4″ 1-1/2″ 2″	19 mm 25 mm 32 mm 38 mm 50 mm
90° V. Notcher	6″ x 6″ x 5/16″	150 mm x 150 mm x 8 mm
Rectangle Notcher V. Notcher Notching in Leg of Channel	3″ x 5″ x 3/8″ 3″ x 4″ x 1/2″3″ x 3″ x 3/8″ 6″ to 10″	75 x 125 x 10 mm 75 x 100 x 12 mm75 x 75 x 10 mm 150 mm to 250 mm
Channel Shear	2″ to 6″ Adj	50 mm to 150 mm Adj
Strut Shear	Samples Required
Rod Shear Round Rod (Max.) Square Rod (Max.)	1/4″ to 1-1/4″, 9 Cav. 1/4″ to 1″, 1 Cav.	6 mm to 32 mm 6 mm to 25 mm
Square Tube Shear	1/2″ to 2″ 12 ga.	12 mm x 50 mm 2.75 mm
Picket Tool	1/2″ 3/4″ 1″ 16 gauge	12 mm 19 mm 25 mm 1.6 mm
Offset Die Holder	Max. 40 ton	36 mt
Strokes Per Minute in Light Material	1/4″ Stroke (Punch Station)	47 spm
Strokes Per Minute in Heavy Material	3/4″ Stroke (Punch Station)	16 spm
Hydraulics	3,500/3,500 psi	241/241 bar
Motor Standard	10 hp 3 ph 230/460 208/380/575V	7.46 kW
Motor Optional	10 hp 1 ph 220V	7.46 kW
Dimensions	W-30″ L-65″ H-72-1/8″	W-76 cm L-165 cm H-183 cm
Shipping Weight	3,800 lbs.	1,723 kg

MEDIA+

Please call for more information on the Scotchman Ironworker 1 (800) 286-3624

OPTIONS+

	LED Light Available on punch station & shear station
	Mandrel Tube Punch (custom tooling) Other styles available in accessories/custom punch and die
	Double Tube Punch Custom built double tube punch
	Flatten and Trim Tube Punch (custom tooling) Other styles available in accessories/custom punch and dies
	Round Tube Punch (custom tooling) Other styles available in accessories/custom punch and dies
	Brake Table with Scale and Squaring Arm 12″ and 24″ Brakes Brake Length Gauge with Scale 12″ & 24″ Brakes
	12″ & 24″ Brake *Back Gauge sold separately.
	Open End Brake
	Pipe Notcher
	90° V-Notcher
	Channel Shear Blades
	Picket Tool
	Tube Shear
	Urethane Shear
	Open End Brake for Notcher End
	6″ x 6″ Die Holder
	Strut Shear
	Offset Die Holder
	48″ Back Gauge
	Optional Punch for Notcher End
	Punch Table Extension
	Multi-Loc Punch Gauging Table 36″ and 85″ Extensions Available
	24″ x 5′ Conveyor with Angle Iron Support attached to DO70/110
	Weld Coupon Bender

Description

If you are looking for a Fully-Integrated/Dual Operator ironworker that has more versatility than any other machine on the market, look no more! The Scotchman DO95/140-24M Ironworker is your machine!

The Scotchman DO 95/140/24M dual operator ironworker has four built-in features including a 95-ton punch (1-3/16″ in 1″), a 6″ x 6″ x 1/2″ angle shear, a 24″ plate shear (1″ x 8″, 3/8″ x 24″) and a rectangle notcher.

Combining these features with the large tool table for quick change of optional tooling plus the best in the business, 3-year parts warranty makes DO 95/140/24M hydraulic ironworker an industry leader.

Key Features:

Dual Operator, 5 Stations
Dual operator allows for two operators to work at the same time at full capacity
95 Ton punch station
Keyed punch ram for safety
Punch gauging table with fence and scale
Die holder complete with 2″ die insert
Punch nut with wrench & stripper
Adjustable swing-away stripper
One round punch & die: max. diameter 1-1/4″
Jog control
Two adjustable electric stroke controls with scale
Two electric remote foot pedals

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the Scotchman DO95/140-24M Ironworker.

Scotchman DO95/140-24M Ironworker

Scotchman DO95/140-24M Ironworker

LED Light

Mandrel Tube Punch

Double Tube Punch

Flatten and Trim Tube Punch

Round Tube Punch

Brake Table with Scale and Squaring Arm

12″ & 24″ Brake

Open End Brake

Pipe Notcher

90° V-Notcher

Channel Shear Blades

Picket Tool

Tube Shear

Urethane Shear

Open End Brake for Notcher End

6″ x 6″ Die Holder

Strut Shear

Offset Die Holder

48″ Back Gauge

Optional Punch for Notcher End

Punch Table Extension

Multi-Loc Punch Gauging Table 36″ and 85″ Extensions Available

24″ x 5′ Conveyor with Angle Iron Support attached to DO70/110

Weld Coupon Bender

Description

Similar products

Scotchman 9012-24M Ironworker

Peddinghaus PeddiMax Ironworker

Scotchman 6509-24M Ironworker

Peddinghaus PeddiCat Ironworker