Amada H1300II Band Saw

FEATURES+

Blade Deviation Monitor
Blade Speed Controlled by Inverter
CNC Control Down Feed
Full Stroke Vise
Light Beam Marking
Motion Detector
Remote Blade Guide Control
Wheel Cover Limit Switch

SPECS+

Cutting Capacity – Round (diameter)	22.5″ – 52″ (570 – 1300 mm)
Cutting Capcity – Rectangle (W x H)	52″ x 52″ (1300 x 1300 mm)
Work Load Capacity	37,487 lbs (17,000 kg)
Blade Dimensions	40’4″ x 0.063″ x 3″ (12,300 x 1.6 x 80 mm)
Blade Speed	50 – 230 ft./mn, by Inverter (15 – 70 m/mn, by Inverter)
Tension Control	Hydraulic
Vise Operation Type	Main Vise
Blade Saw Motor	20 HP (15 kW)
Hydraulic Pump Motor	5 HP (3.7 kW)
Cutting Fluid Pump Motor	1/4 HP (0.4 kW)
Power Supply Voltage	AC220?10%, 3 PH, 60 Hz (All other voltages require transformer)
Power Requirement	35 kVA
Cutting Fluid Tank Capcity	73.9 gal (280 Liters)
Cutting Fluid Pump Type	Electric
Hydraulic Tank Capcity	52.8 gal (200 Liters)
Chip Disposal	Chip Conveyor
Material Index Mechanism	Table Feed, Semi-Automatic
Stroke	70.8″ Hydraulic Manual (1800 mm Hydraulic Manual)
Machine Dimensions – Head Up Position	220.4″ x 169.3″ x 160.8″ (5597 x 4300 x 4084 mm)
Machine Dimensions – Head Down Position	220.4″ x 169.3″ x 136.9″ (5597 x 4300 x 3479 mm)
Table Height (Above Floor)	28″ (710 mm)
Machine Weight	35,200 lbs (16,000 kg)

MEDIA+

Please call for more information about Amada Band Saw H1300II 1 (800) 286-3624

OPTIONS+

	AXCELA G SERIES Band Saw Blades High-performance Carbide Tipped Band Saw Blades High-quality carbide tips and the dove tail tooth shape. AXCELA makes incredible cutting speed for hard to cut material.
	BCTBR Band Saw Blade Multi Faceted Carbide Tipped Blade Designed exclusively for heat-resistant alloys, nickel-based alloys, titanium alloys, and special cast tensile steels, all with high tensile strength of over 142,000 psi. It features ultra-hard, diamond sharp carbide tipped teeth that resist low thermal conductivity and abrasion that can quickly break down conventional bi-metal type bands.
	MAGNUM HI-LO Band Saw Blade Patented Varying Tooth Height and Set M-71 Bi-metal Blade High-quality carbide tips and the dove tail tooth shape. AXCELA makes incredible cutting speed for hard to cut material.
	Hi-Lo Band Saw Blade Varying Tooth Height Design, M-42 Welded Edge The Hi-Lo blade features a high and low teeth height design and a 15-degree rake angle. The blade is ideal for cutting hard steels.
	CHIP BREAKER Band Saw Blade Patented Gullet Design Designed to reduced heat generated at increased chip load. With reduced tooth stripping and breaking this equates to the lowest possible cost per square inch of metal cutting.
	SGLB Band Saw Blade M-42 Bi-metal Blade The SGLB was designed to cover a broad range of cutting applications and to provide maximum efficiency in sawing wear-resistant tool steels. The blade’s tough M-42 cobalt edge resists heat and abrasion, while the varied pitch tooth form expands the ranges of sizes and shapes that can be sawed successfully without changing blades.
	COBALT8 Band Saw Blade Amada Modified M42 High-Speed Steel Bi-Metal Blade General-purpose blade ideal for cutting mild steel and structural steel. “Chip Curler” tooth shape and unique set pattern result in longer blade life.
	SMARTCUT BAND Band Saw Blade Thinner Blade of SGLB and Magnum Hi-Lo Thinner more than 10% from regular SGLB or Magnum Hi-Lo. Specialized Blade for PCSAW330
	PROTECTOR EX M42 Band Saw Blade Exclusive use for structural steel with M-42 Edge. Which has both strength against tooth chipping and high wear resistance. PROTECTOR EX added to the back face of the tooth tip prevents excessive cutting.
	PROTECTOR Band Saw Blade Exclusive Use for Structual Steel with M-30 Matrix Bi-metal Blade Exclusive use for structural steel. Protector provides long blade life and prevents tooth breakage, eliminating excessive tooth stripping. It can withstand the shock of interrupted cuts, allowing for heavier penetration for faster cutting rates. Protector uses a broaching style set pattern designed to eliminate pinching, which prevents the blade from binding the cut.
	MGLB Band Saw Blade General Purpose Matrix Bi-metal Blade The MGLB is best suited for cutting structural shapes, tubing and stacks of mild steel pieces. The MGLB allows band saw machines to cut a wide range of material sizes and shapes without requiring a change of blades. Its tough high-speed steel teeth resist chipping, stripping and abrasion. It can also tolerate the occasional improper speeds and feeds that are often used by inexperienced saw operators.

Description

The Amada H1300II Band Saw is a Horizontal Semi-Automatic Metal Cutting Band Saw.

Material Size: Round 22.5″ – 52″, Rectangle Max. 52″ x 52″

20 H.P.
3″ Blade
Light Beam Marking
Motion Detector
Variable Speed Drive

Hydraulic Vise

Prevents material movement while sawing
Easy set-up
Positive clamping on the full range of capacity

Dual Cut Control System

Combines with fine feed roller for accurate material indexing
Quick and easy set-up
Blade feed controlled by both pressure and flow
Maximum blade life in all cutting applications
Easy set-up with reference cutting rate system

Semi Automatic Indexing

Quick and easy indexing with the fine feed roller

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the Amada Band Saw H1300II.

Amada H1300II
Band Saw